It takes the crack away that really hurts the ears. Still sounds like a gunshot, but will reduce the impact on hearing.
I've killed about 15 deer with subsonic center fire rifles. 300 BLK and .44 mag. Just sayin.Then what's the need for a suppressor? In big game calibers where subsonic rounds are not an option why would you use one?
At one point I was looking into getting one of the "80%" kits from China, they actually make some really nice ones, for an almost unbelievably low price. Some simple machining is required, but the licensing issues and terms deterred me. From the way I read it, if I was to manufacture a silencer, even with the proper paperwork, the police are allowed to come inside my home and inspect that item at any time, I wasn't cool with that, so I'll just shoot unsurpressed.I don't care about them one way or the other. But I don't understand why they are an NFA item.
I'd probably play with them, but the cost is friggin ridiculous. I'd don't say that as a tightwad, I say that as a machinist. You guys are really getting hosed.
I am kinda amused that most new shooters didn't pay attention in school and only care about velocity, to hell with mass and surface area. When they start playing with suppressors, all of a sudden velocity isn't everything they thought it was.
I am not sure it isn't the same with one that you bought vs manufactured. I believe with class III weapons the government can knock on your door and ask to see the weapon and the paperwork. Thats what people with class III weapons have told me..
At one point I was looking into getting one of the "80%" kits from China, they actually make some really nice ones, for an almost unbelievably low price. Some simple machining is required, but the licensing issues and terms deterred me. From the way I read it, if I was to manufacture a silencer, even with the proper paperwork, the police are allowed to come inside my home and inspect that item at any time, I wasn't cool with that, so I'll just shoot unsurpressed.
That's just not true. But if you read the law and you think it is, that's all that matters. You are the only one that will be held responsible for interpreting the law properly..
At one point I was looking into getting one of the "80%" kits from China, they actually make some really nice ones, for an almost unbelievably low price. Some simple machining is required, but the licensing issues and terms deterred me. From the way I read it, if I was to manufacture a silencer, even with the proper paperwork, the police are allowed to come inside my home and inspect that item at any time, I wasn't cool with that, so I'll just shoot unsurpressed.
No, they (ATF) can't just come in and inspect unless you are an FFL SOT making these for others. The kits can be a challenge, legally, as some come very close to being an NFA item without any machining and the ATF has changed enforcement efforts depending on who thinks it is 80% or not. Chinese ones are way too thin and once made you are not allowed to do repairs on them if a tube or baffle need replacing. I bought tools to make one if/when the Hearing Protection Act was passed, I also have studied ways to make one from items such as filters and flashlights in case SHTF and I feel it is worth the effort to silence a weapon. I will opt for better materials though because the thin-walled tubes can cause baffle strikes if allowed to heat up too much..
At one point I was looking into getting one of the "80%" kits from China, they actually make some really nice ones, for an almost unbelievably low price. Some simple machining is required, but the licensing issues and terms deterred me. From the way I read it, if I was to manufacture a silencer, even with the proper paperwork, the police are allowed to come inside my home and inspect that item at any time, I wasn't cool with that, so I'll just shoot unsurpressed.
I didn't realize that making them for others was what the other license and inspection was required for. A lot of the other reasons you listed were secondary reasons that I just decided to not bother, not to mention I don't really do any metal work, so I would have to end up paying someone else to do it, and at that point I might as well just buy a fully assembled one.No, they (ATF) can't just come in and inspect unless you are an FFL SOT making these for others. The kits can be a challenge, legally, as some come very close to being an NFA item without any machining and the ATF has changed enforcement efforts depending on who thinks it is 80% or not. Chinese ones are way too thin and once made you are not allowed to do repairs on them if a tube or baffle need replacing. I bought tools to make one if/when the Hearing Protection Act was passed, I also have studied ways to make one from items such as filters and flashlights in case SHTF and I feel it is worth the effort to silence a weapon. I will opt for better materials though because the thin-walled tubes can cause baffle strikes if allowed to heat up too much.
There were just so many stipulations and technicalities involved with manufacturing your own that I decided to forgo it for legal issues. I very well could have misinterpreted the law, but I'm just not willing to take the risk of making a mistake (like a 5 year mandatory minimum mistake), it doesn't seem worth it to me, I really only shoot muzzleloaders anyway, so it's not really a big deal.That's just not true. But if you read the law and you think it is, that's all that matters. You are the only one that will be held responsible for interpreting the law properly.
Yea, doing a Form 1 silencer can be a hassle if you are not aware of the special rules that are involved with making one, and if going through all that hassle anyway, may as well get the best silencer you can out of it. There are places to buy all the materials you need to make a Form 1 silencer, and the quality is top notch, but again, once built, no matter the quality, you can't do any serious maintenance to it if something needs replacing.I didn't realize that making them for others was what the other license and inspection was required for. A lot of the other reasons you listed were secondary reasons that I just decided to not bother, not to mention I don't really do any metal work, so I would have to end up paying someone else to do it, and at that point I might as well just buy a fully assembled one.
Are you able to do repairs on a suppressor that you purchased rather than built? From what I understand they do eventually wear out, I didn't realize you couldn't repair it either.Yea, doing a Form 1 silencer can be a hassle if you are not aware of the special rules that are involved with making one, and if going through all that hassle anyway, may as well get the best silencer you can out of it. There are places to buy all the materials you need to make a Form 1 silencer, and the quality is top notch, but again, once built, no matter the quality, you can't do any serious maintenance to it if something needs replacing.
No, a baffle, by itself, is considered an NFA item and that is what gets damaged the most. Most every part of a silencer by itself is treated as an NFA item so there is no way to repair them unless you get a Form 1, and make the part.Are you able to do repairs on a suppressor that you purchased rather than built? From what I understand they do eventually wear out, I didn't realize you couldn't repair it either.
They have to have a warrant and probable cause to come asking to see your item(s). Someone can't just knock on your door and demand to see… Remember that video posted a while back where someone showed up to see someone's item and the homeowner called the sheriff department on them…I am not sure it isn't the same with one that you bought vs manufactured. I believe with class III weapons the government can knock on your door and ask to see the weapon and the paperwork. Thats what people with class III weapons have told me.
Yea it was a conversation I had with friends who re-enact who own class III firearms about 30 years ago. I may have remembered it wrong. I do remember that they did say the paperwork had to go with the weapons at all times. One friend had a 50 cal that never fired anything but blanks and I remember he always had the paperwork when he traveled with it. He also had a ppu. Does the paperwork have to go with the suppressor?They have to have a warrant and probable cause to come asking to see your item(s). Someone can't just knock on your door and demand to see… Remember that video posted a while back where someone showed up to see someone's item and the homeowner called the sheriff department on them…
I have a copy in my phone, you must show it if asked by ATF, and LEO if there is a local ordinance covering the item. You must also ask permission to cross state lines, and you must be sure that where you end up allows said items, stamp or not such as CA.Yea it was a conversation I had with friends who re-enact who own class III firearms about 30 years ago. I may have remembered it wrong. I do remember that they did say the paperwork had to go with the weapons at all times. One friend had a 50 cal that never fired anything but blanks and I remember he always had the paperwork when he traveled with it. He also had a ppu. Does the paperwork have to go with the suppressor?
Where do you ask to cross state lines?I have a copy in my phone, you must show it if asked by ATF, and LEO if there is a local ordinance covering the item. You must also ask permission to cross state lines, and you must be sure that where you end up allows said items, stamp or not such as CA.
You have to submit a form (ATF Form 5320.20) to the ATF, I've never done it, or will, but I understand that you can have it for extended periods of time if you regularly cross into another state for ranges and stuff. With my SBRs, I will convert them to pistols if I want to use them elsewhere, so don't need the form, but silencers always will need one unless they pass the HPA. Also, if you move, even within the same state, that form must be submitted.Where do you ask to cross state lines?