shootdonniebrook
Well-Known Member
I know there is no adjustments on the factory encore triggers, so, has anyone changed theirs out? I'd like to have a fully adj. trigger, the one on mine is way to heavy. Where did ya get them, and how much?
thompson encore trigger question
- Thread starter shootdonniebrook
- Start date
megalomaniac
Well-Known Member
Encore Eye Candy
Well-Known Member
Yes Mike is your trigger guru. If you elect to do it your self order 3 to 4 spring, (I recommend #4 -#7). Most of my guns have the #5 but you have to follow the instructions that you can download from his web site. I recommend ordering his stones and pliers to hold spring. Be careful: only mess with the sear to polish and do not alter in anyway or you will have very poor results in your work. I have not had a problem with any until I purchase a used frame the ofter day and someone had screw up the sear so bad I had to send the frame in to get a new sear and that is another 80 buck of wasted time.
Putting the springs in can be very tricky until you do it a number of times.
I also recommend if you do not feel comfortable in doing this type of job please send it to Mike or Jim and pay the 100 +/- to get it done and done right.
If you have any questions, please do not hesitate to contact me.
Putting the springs in can be very tricky until you do it a number of times.
I also recommend if you do not feel comfortable in doing this type of job please send it to Mike or Jim and pay the 100 +/- to get it done and done right.
If you have any questions, please do not hesitate to contact me.
I've done 3 Encore triggers using Mike's instructions and springs. All turned out great. He is a excellent resource.
RH
RH
