Lets see them grills/smokers

BamaProud

Well-Known Member
Joined
Apr 3, 2011
Messages
20,693
Location
Shelby County, TN
Very nice! I just smoke on my grill.
I use a concrete paver and some aluminum foil to eliminate(or at least limit) direct heat.

2012-10-03090858.jpg



Works in all weather...this was last ice strom:
2013-01-16125833.jpg
:)
 

TAFKAP

Well-Known Member
Joined
Nov 6, 2009
Messages
16,044
Location
Memphis
Hardware store special....barrel grill w/ offset fire box. It's got the job did for nearly 8 years now.

5847_591232294145_638766717_n.jpg
 

KubotaM4900

Well-Known Member
Joined
Jun 24, 2011
Messages
1,208
Location
Middle TN
CR500AFX said:
These are the basic plans I used but I built mine bigger. 16'x24' I also added a center upright in all trusses. The pad is approx 4+ inches thick and 12" thick under and around the fireplace. I built my fireplace all under roof rather than hanging out the back like the plans. Honestly, I will have to measure the fireplace and grill itself, as I just built it in even brick lengths. I will post a new picture later as the previous ones are from 2010.

picnicshelter1_zps263fc48d.jpg

Now that is super nice had bluepriints and all...where did you find the prints?
 

DntBrnDPig

Well-Known Member
Joined
Apr 12, 2005
Messages
2,600
Location
Cleveland, TN
I can't find a picture of the whole smoker, but I have a Backwoods Competitor. It's got the fire box down below (you can see the stainless steel door below the racks). Above the fire box is a built in water pan. Then the cooking chamber. The smoke comes up from the bottom through the walls of the cooker and inside the top of the cooking chamber. The smoke fills the cooking chamber and exits out just above the water pan into a smoke stack. I can load this with lump coal and splits of wood and not touch it for 8-10 hours. It's a great smoker.

Here it is loaded with some ribs someone ordered from me (and trimmings).

2013-02-08125905.jpg


And here is the finished product.
2013-02-08175324.jpg


Here's a link to the smoker I have. It looks just like this, just a little more wear and tear.

http://www.backwoods-smoker.com/index.p ... &Itemid=88
 

Latest posts

Top