Anybody got any recipes for 35 REM?

[7mm08]

A good Leupold 1.5x5 VX3 would be perfect on the Marlin 336C.

Thanks.
I got a Vortex Classic II 1-4 x24 to go on it. Small adjustable red dot in the center of the crosshairs and it was free with my Cabela's points! Figured that should be enough for my eyes.

 

[EastTNHunter]

Micro Groove barrels are not recommended for lead bullets

Lead bullets will work just fine in a micro groove barrel, as long as they are properly (over) sized, not pushed too hard, and preferably gas-checked. Micro groove barrels definitely can be more finicky with cast bullets, but proper materials and technique make it very doable still

 

[ROVERBOY]

What kind of velocities are y'all getting with 200 gr. bullets? Mostly what I see is around 2000 or so.

 

[Bart]

37gr of IMR3031 with 200gr bullets were too hot in my 336 Marlin. Every gun is different.
FYI, Lever guns show signs of too much pressure different than bolt actions.
When you look at your fired brass.
If the primer backs out of the pocket even slightly you need to reduce the load. Hope this helps!