Livescope?

Put a new trolling motor on the boat and a new livescope mount (the FO dominator) and can't get the bottom right. In this picture I'm setting in open flat bottom water. No matter how I angle the transducer it looks like this even spinning the trolling motor all the way around. Any ideas?

Almost looks like when my lvs32 transducer crapped out... Is the depth correct???

is AHRS on or off?

Doecrusher said:

Almost looks like when my lvs32 transducer crapped out... Is the depth correct???

Click to expand...

Yes I believe it is

WTM said:

is AHRS on or off?

Click to expand...

I'm not sure

Y'all probably drink Bud Light to……

Have you tried doing a calibration?

Crow Terminator said:

Have you tried doing a calibration?

Click to expand...

Not since the new mount and trolling motor

WTM said:

is AHRS on or off?

Click to expand...

Just got home and checked. AHRS is on

It seems like mine did that once and leveled out after I did the calibration.

Crow Terminator said:

It seems like mine did that once and leveled out after I did the calibration.

Click to expand...

You may be on to something. I know I calibrated it when I originally installed it but now it's saying that it's not calibrated. I am going to try to go fishing tomorrow and will mess with it some more. I am learning a little more about it from y'all's suggestions. WTM mentioned the AHRS. I didn't know anything about it so started doing a little reading. If I turn the AHRS off then it gives the ability to level the bottom. I'm going to mess with it. I have another transducer I can swap it with if need be but hopefully I can get this one figured out. I didn't have any problems when I first installed it.

Dont know, but u on em!

Recalibrate the compass should correct it.

You guys were right the calibration fixed it. Also now that it's fixed I can see my bait better than ever with the new mount. I think it's because it's a zero degree mount. Thanks for the help.

Maybe you could stand on the right side of the boat?

TRIGGER said:

You guys were right the calibration fixed it. Also now that it's fixed I can see my bait better than ever with the new mount. I think it's because it's a zero degree mount. Thanks for the help.

Click to expand...

We rig and sponsor jake lawrence,he won the bfl the other day on kylake.He runs his on a perspective mound in forward mode,when shallow he runs it a click or 2 above the highest settings mark.He also has the fish obsessed mount,we tried it first and he didn't like it compared to the factory one.3 days before the bfl we added a second livescope to his boat on the fish obsessed mount above his factory perspective mount,it's in perspective mode.