Got this 4 wheeler last fall. Needed some tlc and got it running. Ride it at least once a week around the neighborhood. Last week it started wanting to flood and take a bit to start. Over the weekend I went to take it to the farm and it wouldn't start. Cranked on it and nothing. Got fuel in the air filter box. Took off to Yamaha and got 2 new plugs and a carb kit. Also grabbed 2 cans of carb cleaner while I was in town. Tore it down and put the new kit in. Changed all I could find and still have a few o rings extra. I have no idea where they go but all pilots were changed and new float needle and seat changed. Still won't start. So I've sent a full can of carb thru it, and a rebuild kit rebuild kit. I also found a hole in the carb that according to a a diagram should have a hose but I have no idea where it goes. I can blow air thru it just fine. I don't ever remember hooking anything to it and it's ran fine. My finger is on the hole
Machine is an 05 Yamaha Bruin 250
Machine is an 05 Yamaha Bruin 250