What did you do today in the reloading room?

[Deerhunter]

Just trying to start a fun thread. I stole this idea from another forum, a chance to tell us what your doing and keep the reloading forum alive!


I'm personally resizing 100 new(old stock) 35 rem cases that had alot of dented case mouthes. They just went into the tumbler, and as soon as they get done will be sizing them.

 

[fullstream]

Loaded up some Barnes 120's over varget for the 7-08. Excited to see how they shoot. Also loaded 10 280 ai with the 150 eldx. They are gonna have to shoot good to replace the Nosler's lol.

 

[kornbread]

I didn't do anything today, but did some loading yesterday. I loaded some 308 Win. 165gr GMX with 44gr Varget.

 

[nso123]

Loaded some 280AI with 146gr Hammers to try out and some 6mm Creedmoor with 88gr Hammers.

 

[Safari Hunt]

Nothing today. Spent yesterday adjusting a charge bar to load 3/4 oz. 12 ga. loads. Tomorrow I'll work on the powder charge, 16.7 grains of Clays. Using 3/4 oz. for skeet. If I was shooting in competition, I would go for the full 1-1/8 oz. load for the extra shot. I can get 533 loads out of a 25 lb. bag of shot with the 3/4 oz. load! I'm cheap...so cheap they have my picture next to the word in the dictionary.

 

[Deerhunter]

Not exactly today, but yesterday I did manage to score 8lbs of IMR4350. Been thinking of picking some up for 3006 but should be useful in my 7mm-08 and 243 loads.

 

[Sniper23]

Yesterday I loaded up some 140gr Hornady 6.5 creedmoor using H4350.

 

[backyardtndeer]

Nothing lately. Been using most my free time sitting in a tree. Come January and February will be spending more time at my bench.

 

[WhiteJD4]

ah i believe you seen it from ar15.com thats where i have seen it. i ordered box of Hornady 6.5 140gr. SST's, Hornady ELD-x .30 cal. 200gr. , Nosler partition .30cal 200gr. to load up some different stuff later on during the end of deer season. oh and forgot ordered Barnes tipped tac-tx for the 300BLK and a 6.5 factory crimp.

 

[WhiteJD4]

Just trying to start a fun thread. I stole this idea from another forum, a chance to tell us what your doing and keep the reloading forum alive!


I'm personally resizing 100 new(old stock) 35 rem cases that had alot of dented case mouthes. They just went into the tumbler, and as soon as they get done will be sizing them.

View attachment 120859

i use the 35 deer hunting thing is a tack driver with my marlin 336

 

[Sniper23]

I've got a couple different 6.5 bullet varieties, but I'd love to find some Hornady 143gr ELD-X. I don't have any of those yet.

 

[WhiteJD4]

I've got a couple different 6.5 bullet varieties, but I'd love to find some Hornady 143gr ELD-X. I don't have any of those yet.

Yeah i have been searching for them for awhile now.

 

[fairchaser]

We had our last club match for the year yesterday, so I cleaned my rifle good and inspected my .308 brass for a signs of separation. Everything looked good after 4-5 firings, so I'll deprime and wet tumble to get it ready for next season.

 

[fullstream]

I've got a couple different 6.5 bullet varieties, but I'd love to find some Hornady 143gr ELD-X. I don't have any of those yet.

Send me a pm with address I'll send ya 20 to test. Finally got a box recently.
Steve

 

[Hillbilly Hunter]

I usually do my reloading in January and February.

 

[backyardtndeer]

I've got a couple different 6.5 bullet varieties, but I'd love to find some Hornady 143gr ELD-X. I don't have any of those yet.

Keep a watch at Scheels and grafs. I have managed to stock up pretty well on the 143 grain eldx. They run pretty close to the 140 grain match bullets I had been loading.

I have a lot of testing to do after deer season.

 

[Gad Father]

Loaded 10 280 AI that I fireformed from 280 Remington. 55 grains IMR4831 and a 160 grain ballistic tip. My gun loves them.

 

[Sniper23]

Keep a watch at Scheels and grafs. I have managed to stock up pretty well on the 143 grain eldx. They run pretty close to the 140 grain match bullets I had been loading.

I have a lot of testing to do after deer season.

I just picked up the Fix rifle in 6.5 about a month ago. What a fine time for me to start trying load for a new caliber. I'm still waiting on the bipod and scope mount to arrive so I can get the scope mounted and zero'd. I've got some Hornady 140gr Match loaded up and ready for when everything else gets here.

 

[ROVERBOY]

I've not loaded any in a couple weeks. Last I loaded was some 185 gr. .45 ACP.

 

[7mm08]

I didn't do anything today, but did some loading yesterday. I loaded some 308 Win. 165gr GMX with 44gr Varget.

That's exactly what I push my 140g TSX 7-08 with!