I have to use bagged pelletized lime. Its expensive,.. but in hills thats all we can do. We use the 4x4 Kubota with a 600 lb capacity spreader on back to spread it. In the plot(pic) above the ph was 5.4. Soil test revealed it needed 2.5 ton of lime. I applied 1 ton about 3 weeks ago and i'll apply another ton in spetember. A plot is not a plot if it don't have lime.But,.. the pic above shows how well this mix works even in poorer soils. 5.4 is pretty low,.. and i can't complain on my results. Can't wait to see how it performs when the ph is 6.0 or better.
Fertilizer, i started using 0-45-0 super potash and 0-0-60 super phosphate in 50 lb bags. Its cheaper this way. AND,.. if my planting calls for nitrogen i'll use 34-0-0. I had to use my UT extension office professional here in woodbury to calculate how much i needed. I'm pretty good at math ,.. but thats confusing on how to get the correct figure. Ended up needing 250 lb of potash (0-45-0) and 150 lb of phosphate (0-0-60). I do all my soil test thru the UT extension office up here and they are very helpful throughout the whole process.
By the way,.. i told a little lie about not using big name seed companies except bfo. I use tecomate chicory in my clover plots. This stuff is probably the most preferred deer browse i have ever put in ground since i started plotting 6 years ago. Some chicories only see usage late summer and fall. On my place ,.. the tecomate is browsed from spring til winter. Of course ,.. its hammered in the fall. I highly recommend using this in any clover perrennial plot. Especially those that can become dry.
Hope your spraying went well today. Mine worked out perfectly. Sometimes the wind will run right up that holler. This morning she was as still as a newborn baby rabbit.:grin: