Kahr MK40, All stainless, 40S&W, 3" Barrel
The Pistol is a like new condition safe queen, in the original box, 25-50 rounds fired. Included is everything that came with a new gun. One 5 round mag and one 6 round with grip extension.
$575 picked up in Murfreesboro.
TRADES: I need a Mil-Spec 1911, requirements are listed below the pictures. I don't think there is much else I would be interested in trading for, but you never know. PM me with trade interests.
BTW… I was asked about the "Dings" in the slide and frame. Those aren't dings, they are alignment marks for slide assembly/disassembly.
Thanks
Link to the gun on Kahr's site:
shopkahrfirearmsgroup.com
I would be interested in a Mil spec 1911 that is legal for SASS. I already have a high end 1911, so I'm only interested in a plain Jane Mil Spec that meets the following requirements.
A full-size single stack steel frame 1911 style semi-auto pistol in .45 ACP caliber is required. 1911A1 model as well as its clones.
The frame and slide must conform to the "military style" 1911 or 1911A1 configuration (e.g., no light rails, enlarged dust covers, and so forth).
• Barrel length must be five inches. No barrel porting or compensators or other recoil reducing devices allowed.
• Unloaded pistol weight may not exceed 40 ounces with an empty magazine inserted.
• Barrel with standard barrel bushing. No Bull barrels allowed.
• Magazine wells may be beveled, but may not be oversized, extended, or flared.
• Only non-adjustable "military style" simple blade rear and front sights allowed. The 10-8 National Match and the Harrison Design 003 are approved rear sights.
• Front sights may be dovetailed, pinned, or staked.
• Stainless steel pistols are permitted.
• Wrap around grips that cover a portion of the front strap are illegal. No target style or thumb rests allowed.
• Only rear slide checkering or serrations. No front slide checkering or serrations.
• Only standard grip safeties. No beavertail style grip safeties.
• Standard length magazine release. May not be extended or oversized.
• Standard thumb safeties only. May not be extended.
• Standard slide release. May not be extended.
• Standard recoil spring guide. No full-length guide rods allowed.
• Short or long solid trigger permitted. No flat or lightweight match triggers allowed.
• Flat or arched mainspring housings permitted. Mainspring housing may be serrated or checkered.
• Lowered and flared ejection port is allowed.
• Checkered front strap or trigger guard not allowed.
• Standard spur type hammer only.
The Pistol is a like new condition safe queen, in the original box, 25-50 rounds fired. Included is everything that came with a new gun. One 5 round mag and one 6 round with grip extension.
$575 picked up in Murfreesboro.
TRADES: I need a Mil-Spec 1911, requirements are listed below the pictures. I don't think there is much else I would be interested in trading for, but you never know. PM me with trade interests.
BTW… I was asked about the "Dings" in the slide and frame. Those aren't dings, they are alignment marks for slide assembly/disassembly.
Thanks
Link to the gun on Kahr's site:
MK40, Matte Stainless Steel Slide, CA Approved
shopkahrfirearmsgroup.com
I would be interested in a Mil spec 1911 that is legal for SASS. I already have a high end 1911, so I'm only interested in a plain Jane Mil Spec that meets the following requirements.
A full-size single stack steel frame 1911 style semi-auto pistol in .45 ACP caliber is required. 1911A1 model as well as its clones.
The frame and slide must conform to the "military style" 1911 or 1911A1 configuration (e.g., no light rails, enlarged dust covers, and so forth).
• Barrel length must be five inches. No barrel porting or compensators or other recoil reducing devices allowed.
• Unloaded pistol weight may not exceed 40 ounces with an empty magazine inserted.
• Barrel with standard barrel bushing. No Bull barrels allowed.
• Magazine wells may be beveled, but may not be oversized, extended, or flared.
• Only non-adjustable "military style" simple blade rear and front sights allowed. The 10-8 National Match and the Harrison Design 003 are approved rear sights.
• Front sights may be dovetailed, pinned, or staked.
• Stainless steel pistols are permitted.
• Wrap around grips that cover a portion of the front strap are illegal. No target style or thumb rests allowed.
• Only rear slide checkering or serrations. No front slide checkering or serrations.
• Only standard grip safeties. No beavertail style grip safeties.
• Standard length magazine release. May not be extended or oversized.
• Standard thumb safeties only. May not be extended.
• Standard slide release. May not be extended.
• Standard recoil spring guide. No full-length guide rods allowed.
• Short or long solid trigger permitted. No flat or lightweight match triggers allowed.
• Flat or arched mainspring housings permitted. Mainspring housing may be serrated or checkered.
• Lowered and flared ejection port is allowed.
• Checkered front strap or trigger guard not allowed.
• Standard spur type hammer only.
Last edited:
