Norma brass

Tennessee Deer Sporting & Deer Hunting Community Forum

Help Support TNDeer | Tennessee Deer:

Jcalder

Jcalder

Well-Known Member
Platinum Member
Joined
Sep 18, 2012
Messages
11,652
City & State/Province
Cookeville
Anyone ever load the stuff. I expect it to be good, but how does it compare to the other like Lapua, Peterson, adg….. How much case prep should I expect to do. I know Lapua and Peterson is generally good to go as far as primer pocket uniformity and deburring go. I'll size this before I start.
image.jpg
 
Norma brass is OK but doesn't handle pressure well. Prep work will be similar to Lapua.

ADG and Lapua are far superior and Peterson gets good reviews, although I've not used any of their brass.
 
markwondi said:
Norma brass is OK but doesn't handle pressure well. Prep work will be similar to Lapua.

ADG and Lapua are far superior and Peterson gets good reviews, although I've not used any of their brass.
Click to expand...
Now you're having me second guessing myself on passing on the Peterson lol
 
markwondi said:
The Norma brass will be fine, don't sweat it. It's not my first choice in brass but it'll work.
Click to expand...
I could have got Peterson but it was about $45/100 more than I got the Norma. I always thought norma was good, but I've never used it.
 
I run it in a 300 wsm because I wasn't aware of another brand that would be better for that caliber (maybe there is now). Seemed to get good reports. I think it is a bit softer, but it is uniform and consistent. While working up loads I noticed some very faint ejector marks on the case head even though there were no other pressure indicators and I was well below book max charges and velocity. Dropped back a little. Seems others have reported this before as well. Just something to keep an eye on. Mine only has 3-4 firings so time will tell. I have started annealing after each firing to see if it will help extend the brass life.

I also run it in 7-08 (before Lapua started producing) and oddly I have not seen any pressure signs in the brass like above even though I'm loading this one on the high end within book range.
 

Latest posts

Back
Top