primos32
Well-Known Member
It's about that time of year to do some hack and squirt projects... What do y'all use to get rid of beech and maples?
Hack and Squirt
- Thread starter primos32
- Start date
landman
Well-Known Member
Logging crew
Jarred525
Well-Known Member
Arsenal
dh1984
Well-Known Member
Hack and Squirt?
I've been working a few TSI projects recently myself. I kill Maples with Tordon RTU ($12 / quart)and Beech with Arsenal (expensive)
dh1984
Well-Known Member
oh i c now i don't have any problem like that i don't think
get with BSK,he knows some real good methods
BSK
Well-Known Member
I use a mix of Garlon 3A and Arsenal
Quailman
Well-Known Member
BSK said:
That mix will kill about anything! Make sure you are wearing gloves and safety glasses when mixing Garlon 3A. It can cause eye damage.
Jarred525
Well-Known Member
BSK said:
BSK, what is your specific mix?
BSK
Well-Known Member
I use a mixture of three parts water to one part Garlon 3A. And for every gallon of that mixture, I add 6 fluid ounces of Arsenal. So for every three quarts water and one quart of Garlon 3A, add 6 ounces of Arsenal.
Hacks around the tree should come close to overlapping, and into each hack should be squirted 1 ml of the mixture (a Windex spray bottle works great--I measured the one I use and a full squirt is 2 ml, so half a squirt in each hack).
Hacks around the tree should come close to overlapping, and into each hack should be squirted 1 ml of the mixture (a Windex spray bottle works great--I measured the one I use and a full squirt is 2 ml, so half a squirt in each hack).
