Found my KE..

[cecil30-30]

Ok,went to the bow shop and shot through their chrony and turns out he didn't charge me for it..LOL Anyway, My bow is rated for 304FPS,and it is shooting a 425gr arrow at 260FPS..So that gives me a KE of 64lbs..Is that plenty enough to shoot any mechanical head?And my bow is supposed to be a 70lbs draw,but is only 66lbs..Is it normal for your bow to be off a pound or two from the factory setting of 70lbs?

 

[spoon]

That will work for pass thru, mech. broadheads

 

[bucks2beards outdoor]

Put some twists in the string to get that poundage back where it needs to be ,the string ha streched more then likely.

 

[ShaneHallum]

String could be stretched. You have plenty of KE for any broadhead.

My bow actually maxes out at 73lbs. it has 60-70lb limbs

 

[cecil30-30]

Would you guys worry about trying to get that extra 4lbs to make it 70lbs or just leave it be..It shoots great,I have 2 robbin hoods this month to prove it..LOL

 

[MKWood]

i wouldn't touch it till after huntin season. your fine.

 

[Buck Assassin]

You can shoot any broadhead out there. Not sure why you are only pulling 66 though? Are the limb bolt all the way down?

 

[cecil30-30]

You can shoot any broadhead out there. Not sure why you are only pulling 66 though? Are the limb bolt all the way down?

Yup,they are tight..I had a new bucknasty string put on it a few months ago,it could have streched a little..The bows ATA length is just like 1/8in out of spec..

 

[JeepKuntry]

Put some twists in the string to get that poundage back where it needs to be ,the string ha streched more then likely.

I was thinking string stretch myself. Lookin into a custom string.