Mine is built on a standard Savage 10ml2 action with the following specs:
- .40 Pac-Nor barrel
- 25" stainless steel barrel
- 11 degree target crown
- .40 caliber 16 twist; 6 groove barrel
- fluted (6 flutes)
- bread blasted (action and barrel by my gunsmith)
- chambered for a stock savage breechplug
- .300" Callahan recoil lug
- glass and pillar bedded
- 2.5# trigger
I shoot .40 bare bullets (no sabot) knurled to .401-.402. Currently, these are the 195 gr Barnes and the 200 gr Hornady SST. These are shot with powders in the range of Varget to RL-17/H4350. As a side-note: I would have built this in 7mm if scn would relax TN's minimum bore size. hint, hint :)
- .40 Pac-Nor barrel
- 25" stainless steel barrel
- 11 degree target crown
- .40 caliber 16 twist; 6 groove barrel
- fluted (6 flutes)
- bread blasted (action and barrel by my gunsmith)
- chambered for a stock savage breechplug
- .300" Callahan recoil lug
- glass and pillar bedded
- 2.5# trigger
I shoot .40 bare bullets (no sabot) knurled to .401-.402. Currently, these are the 195 gr Barnes and the 200 gr Hornady SST. These are shot with powders in the range of Varget to RL-17/H4350. As a side-note: I would have built this in 7mm if scn would relax TN's minimum bore size. hint, hint :)