• Help Support TNDeer:

What did you do today in the reloading room?

Made some bullets and sprayed some bullets... MIhec .44 HP. 317 grains.
 

Attachments

  • 20220320_121545.jpg
    20220320_121545.jpg
    105.7 KB · Views: 37
  • 20220320_110717.jpg
    20220320_110717.jpg
    145.7 KB · Views: 41
  • 20220320_104025.jpg
    20220320_104025.jpg
    194.8 KB · Views: 34
  • 20220320_111644.jpg
    20220320_111644.jpg
    201 KB · Views: 37
Measured lake city 223 brass this morning. Have roughly 225 to trim, about the same in spec that I just need to debur and chamfer.
Trade you. I'm part way through chamfering & reaming primer pockets on this lot. I don't even know how many there are! 😬 I lost the feeling in my hands about 3 hours back.....

20220322_192929.jpg
 
Ive been fully processing and priming brass

Pressing in the pills this weekend

9mm both 124gr 147gr HST
45 acp 230gr HST and V crowns
243 95gr NBT
270 130gr SST and NBT
7 SAUM pressing in some fire form loads , some 162gr amax loads, 160gr AB loads and some 168gr VLD hunters
 
Trade you. I'm part way through chamfering & reaming primer pockets on this lot. I don't even know how many there are! 😬 I lost the feeling in my hands about 3 hours back.....

View attachment 132553
At least you are not turning a hand crank trimmer. I recently got the power adapter for my hornady cam lock trimmer, I sure don't miss cranking that handle.
It's almost like I hate my right hand......🥵

View attachment 132715

385 down, 1015 to go.
That would take me a little while.
 
At least you are not turning a hand crank trimmer. I recently got the power adapter for my hornady cam lock trimmer, I sure don't miss cranking that handle.

That would take me a little while.

Oh lordy! I use my trimmer with a cordless drill! Unhooked the handle & used a slightly longer bolt into the spindle.
 
You ever try to use that rascal for trimming down .300blk brass?! All there is sticking out is the freaking rim! 🤣
I've not done that, but did trim 1500 223 last year. It sucked. Another quick trim tool… took a Lee trimmer die and the cutter. Set my trim die a hair tall and cutter in the drill. Took 30-06 and resized to 7x57. I'd still be trimming if I hadn't done that
 

Latest posts

Back
Top