TC Impact

[Matador]

My son just acquired one with a Nikon Prostaff range compersater on it. What do you guys recommend for best accurate hunting load from anyone who has one. Or had experience with one. Thanks

 

[TNCanoer]

150 grain magnum powder load with Hornady 240 grain XTP hollow point. Deadly in a TC impact!!

 

[knightrider]

100 grain loose triple seven and 250 grain Barnes tez

 

[GMB54]

T/Cs are notorious for having tight bores. I would get some Harvester black crushrib sabots, Blackhorn209 powder and a box of 45cal 250gr XTPs. Start around 90gr of Blackhorn209. There is no way in the world i would be shooting 150gr pellet loads out of that little rifle. You can get about the same velocity from 120gr of BH209 and its cheaper per shot. No crud ring or seized breach plugs and way way less corrosive.

 

[soggybottom]

90 grain BlackHorn 209,
250 Barnes Tez
This load will Cloverleaf at 100 yards in my son's rifle.

 

[fireman815]

Harvester sabots are a must I had to get them last year for my impact when I went away from power belts

Sent from my LGUS992 using Tapatalk

 

[Isomaad]

90 grain BlackHorn 209,
250 Barnes Tez
This load will Cloverleaf at 100 yards in my son's rifle.

I totally agree with this. I use the exact same load in my Impact and it shoots tight and consistent. Have killed two 8 points with this load since 2014 and neither deer ran more than 75 yards.

 

[iowavf]

T/Cs are notorious for having tight bores. I would get some Harvester black crushrib sabots, Blackhorn209 powder and a box of 45cal 250gr XTPs. Start around 90gr of Blackhorn209. There is no way in the world i would be shooting 150gr pellet loads out of that little rifle. You can get about the same velocity from 120gr of BH209 and its cheaper per shot. No crud ring or seized breach plugs and way way less corrosive.

Actually 120 grains of blackhorn is equal to 150 grain pellet load.

 

[GMB54]

T/Cs are notorious for having tight bores. I would get some Harvester black crushrib sabots, Blackhorn209 powder and a box of 45cal 250gr XTPs. Start around 90gr of Blackhorn209. There is no way in the world i would be shooting 150gr pellet loads out of that little rifle. You can get about the same velocity from 120gr of BH209 and its cheaper per shot. No crud ring or seized breach plugs and way way less corrosive.

Actually 120 grains of blackhorn is equal to 150 grain pellet load.

I believe that is what i posted wasn't it?