Food Plots Tank Sprayer conversion-wand to boom?

[LanceS4803]

I have a 15 gallon ATV mounted tank sprayer with the spot application wand. Runs off 12v. Works great for intended purpose, but I need something for the plot to get a measured and even application.
Does anyone know of a conversion kit to remove the spot wand and replace with a multi-head spray boom?
(I see TSC has kits for their own brand of tank, that actually mount on the tank.)

 

[buckaroo]

I am pleased with my blackrain boomless sprayer for 49$, but you need at least a 2 gallon per min pump, you can upgrade pumps for another 50$, Amazon

 

[Jcalder]

I went to the coop and bought a boomless sprayer head. Cost $35 if I remember correctly but throws probably a 15 foot spread. I cut about a foot off the hose and used a U-bolt to hold it in place. Got a coupling and threaded the head to it. I can take pictures if needed but does a good job. I can also loosen the hose clamp on the pump and unhook the one foot hose and reattach the wand if I want


Sent from my iPhone using Tapatalk

 

[FTG-05]

What's the output fitting from the pump to the wand? If it's a garden hose fitting, get a GH tee with valves. It's how mine is done. One goes back to the tank to recirculate, the other to either the wand for spot spraying or my 9' boom for area spraying.

Good luck.

 

[LanceS4803]

Looks like I have some options!
I'll get this thing out of the shed and take a closer look at fittings.

 

[Jcalder]

this is what I done with my sprayer. I should be able to loosen the hose clamp on the pump and put my wand back on.


Sent from my iPhone using Tapatalk

 

[LanceS4803]

That is super simple. What kind of spread are you getting with that?
I have the exact same hose setup.

 

[Jcalder]

12-15 foot I think. I was planning on taking a video for you but ended up not spraying today.


Sent from my iPhone using Tapatalk

 

[Jcalder]

I would also suggest possibly mounting the nozzle a bit higher or sealing the holes where the u bolt is. I could get another gallon or three in there if they were sealed


Sent from my iPhone using Tapatalk

 

[Blackdog]

I rebuilt a sprayer a while back and added a manifold from Agri supply to accomodate the sprayer gun, boom, recirc. and a pressure gauge. Mounted it to the tank with an "L" bracket.