Suggestions or help please

[BD1]

I need some help. The scope on a crossbow that I just bought is maxing out on the windage side. I can get it to about 6" right of target at 20 yds, but it stops turning at that point. It's a Parker crossbow with their optics. Any suggestions?

 

[DaveB]

I have no experience with that brand but I would first call Parker.

You using a picatinny rail? Best check to be sure the rear ring is installed correctly.

 

[fairchaser]

I would try different bolts to make sure you are shooting consistently. If so, then it's the scope and you should be able to tell visually if it's mounted improperly. There should be plenty of windage range in the scope. Also remember that you turn the dial in the same direction you want the poi to move.

 

[Cotis]

You can use Burris Signature rings with the plastic inserts. They make offset plastic inserts that let you adjust for windage/elevation depending on how you turn them