BIG D
Well-Known Member
Knight mk-85 . What's the best method?
Dang I hate I forgot this. S/S barrel
Dang I hate I forgot this. S/S barrel
STUCK BULLET...............
- Thread starter BIG D
- Start date
I used a bullet puller yesterday on my knight Wolverine.
If you don't have a puller you should be able to soak it with oil and push it all the way out the breech with the plug out.
Unfortunately, I've had to do both in the last couple of days as I'm having some big problems with my Knight.
If you don't have a puller you should be able to soak it with oil and push it all the way out the breech with the plug out.
Unfortunately, I've had to do both in the last couple of days as I'm having some big problems with my Knight.
buckdead
Well-Known Member
hammer time!! lol
man that sucks. i always take the plug out and try and push it on thru
man that sucks. i always take the plug out and try and push it on thru
Still-n-Quiet
Well-Known Member
I'm not familiar with the Knight. Is that a side-lock or inline?
iowavf
Well-Known Member
If you can push it out through the breach plug might work better than a puller. I have a brass rod I got at the hardware store to drive mine out if needed, instead of beating on my ram rod.
You'd need to remove or otherwise make the powder inert to use a ball puller safely so just to ahead and take the breech plug out, dump the powder and push it out. It shouldn't be that hard to remove once you've got the breech plug out. Be sure and clean those threads because the dumped powder will get into them. That's all just a part of normal maintenance anyway.
