still wont start

hunter3405

Well-Known Member
Joined
Sep 8, 2009
Messages
1,889
Location
Columbia, Tn. USA
so i drained all the old gas out cleaned up every thing, put some new super unleaded in and nada....may have to suck it up and carry it to a shop somewhere. any one know a good motorcyle mechanic for cheap in the Columbia area??
 

FULLDRAWXX75

Well-Known Member
Joined
Jan 29, 2007
Messages
6,227
Location
Adirondack Mtns, NY
Is the petcock in the on position? If yes, is fuel getting to the carb? If yes, is fuel get to the intake?

Getting spark to the plugs?

Remove the plugs, pour a small amount of fuel in the cylinder and reinstall the plugs, try cranking it over and see if it will fire.

FDXX75
 

hunter3405

Well-Known Member
Joined
Sep 8, 2009
Messages
1,889
Location
Columbia, Tn. USA
FULLDRAWXX75 said:
Is the petcock in the on position? If yes, is fuel getting to the carb? If yes, is fuel get to the intake?

Getting spark to the plugs?

Remove the plugs, pour a small amount of fuel in the cylinder and reinstall the plugs, try cranking it over and see if it will fire.

FDXX75

ill try this tommorrow after church
 

hunter3405

Well-Known Member
Joined
Sep 8, 2009
Messages
1,889
Location
Columbia, Tn. USA
still nothing.I am at a loss now, but i got to get her running b4 spring. i am going to take it to a shop and have them look at it.
Do you know any good ones around Maury Co.?
 

Latest posts

Top