geezer
Well-Known Member
Has anyone ever spliced limbs from a different color dogwood before, A lady up the road from me has a white/red one and it looks cool, curious how hard it is to do.
splicing dogwoods
- Thread starter geezer
- Start date
geezer
Well-Known Member
spoon
Well-Known Member
PM smstone22 and ask him about grafting dogwoods
Little late for grafting this year. Budding time will be coming up for dogwoods around late August though. Budding tends to be easier for most folks than grafting. Ill find some budding instructions for you and copy/paste them below. Its really not that hard, you should try it. Also check out youtube for some good videos on how to do it.
Unlike grafting where you use a small branch to attach to the seedling, when you bud you insert a single bud under the bark, budding is usually done down low on the seedling, very close to the soil. You can bud up higher, but any new growth that appears below that bud must be removed because it will be identical to the rootstock and not the desired variety.
The budding process is quite simple. Just clip a branch from the tree of the desired variety, this is known as a bud stick because it has many buds that can be used for budding. The buds can be found at the base of each leaf. Look closely where the leaf emerges from the branch and you will see a very small bud. In the fall when the tree goes dormant the leaf will fall off, and bud will remain. The following spring the bud will grow into a new branch.
When you slip that bud under the bark of a compatible seedling, it will grow the following spring just as if it were still on the parent plant, with all of the qualities of the desired variety. All most all fruit bearing and ornamental trees are grown this way.
Just make a �T� shaped cut in the bark of the seedling. A horizontal cut about �� long, with a vertical downward cut about �� long. The two cuts should intersect at the top of the �T�. Don�t cut into the cambium tissue, just slice the bark and open it up slightly with your knife or razor blade. Now you are ready to remove the bud from the bud stick.
First clip off and discard the leaf from the bud that you are about to remove. When you remove the leaf, leave the stem attached to the bud stick, just remove the leaf itself. The stem makes a nice little handle to hold on to. To remove the bud from the bud stick just cut into the bark and under the bud, it should pop off easily. Again, don�t cut into the cambium tissue, but make sure you are under the bark so you don�t damage the bud. Along with the bud you will have a small piece of bark shaped like a tiny banana peel, and the stem from the leaf.
Visit this page for photos of this complete process: http://www.freeplants.com/budding_fruit ... plants.htm
Holding the bud by it�s handle (the stem) slide it into the �T� shaped cut you made on the seedling. Make sure you put it in right side up. The stem and the leaf should protrude through the slit, and the stem should be pointing toward the sky at an angle. Push the bud all the way down into the slit by catching the bark, (Not the Bud) with the tip of your knife.
Now cut a rubber band so that it is no longer a loop and wrap it around the seedling to close the opening so dirt, water, air, and insects can�t get in. Make a wrap below the bud, and a few wraps above the bud. Use a rubber band approx. �� wide, and be careful not to wrap too close to the bud, nor to tight.
You don�t want to strangle the seedling, it needs to be healthy and happy so the new bud will bond to the cambium layer. Leave the rubber band on until early spring, at which time you should remove it, and clip off the top of the seedling just above the bud. As the plant comes out of dormancy the bud will begin to grow into a new branch just as if it is still attached to the parent plant, except that now it is going to grow upright and form the stem of a tree.
When this new growth reaches a height of 3 to 4 feet, clip the tip off, this will force it to start putting on lateral branches. Once these lateral branches are 18� long or so, you can remove all the growth from the stem below where the lateral branches start. Now the plant should look like a beautiful little tree. And that makes you the proud parent!
Unlike grafting where you use a small branch to attach to the seedling, when you bud you insert a single bud under the bark, budding is usually done down low on the seedling, very close to the soil. You can bud up higher, but any new growth that appears below that bud must be removed because it will be identical to the rootstock and not the desired variety.
The budding process is quite simple. Just clip a branch from the tree of the desired variety, this is known as a bud stick because it has many buds that can be used for budding. The buds can be found at the base of each leaf. Look closely where the leaf emerges from the branch and you will see a very small bud. In the fall when the tree goes dormant the leaf will fall off, and bud will remain. The following spring the bud will grow into a new branch.
When you slip that bud under the bark of a compatible seedling, it will grow the following spring just as if it were still on the parent plant, with all of the qualities of the desired variety. All most all fruit bearing and ornamental trees are grown this way.
Just make a �T� shaped cut in the bark of the seedling. A horizontal cut about �� long, with a vertical downward cut about �� long. The two cuts should intersect at the top of the �T�. Don�t cut into the cambium tissue, just slice the bark and open it up slightly with your knife or razor blade. Now you are ready to remove the bud from the bud stick.
First clip off and discard the leaf from the bud that you are about to remove. When you remove the leaf, leave the stem attached to the bud stick, just remove the leaf itself. The stem makes a nice little handle to hold on to. To remove the bud from the bud stick just cut into the bark and under the bud, it should pop off easily. Again, don�t cut into the cambium tissue, but make sure you are under the bark so you don�t damage the bud. Along with the bud you will have a small piece of bark shaped like a tiny banana peel, and the stem from the leaf.
Visit this page for photos of this complete process: http://www.freeplants.com/budding_fruit ... plants.htm
Holding the bud by it�s handle (the stem) slide it into the �T� shaped cut you made on the seedling. Make sure you put it in right side up. The stem and the leaf should protrude through the slit, and the stem should be pointing toward the sky at an angle. Push the bud all the way down into the slit by catching the bark, (Not the Bud) with the tip of your knife.
Now cut a rubber band so that it is no longer a loop and wrap it around the seedling to close the opening so dirt, water, air, and insects can�t get in. Make a wrap below the bud, and a few wraps above the bud. Use a rubber band approx. �� wide, and be careful not to wrap too close to the bud, nor to tight.
You don�t want to strangle the seedling, it needs to be healthy and happy so the new bud will bond to the cambium layer. Leave the rubber band on until early spring, at which time you should remove it, and clip off the top of the seedling just above the bud. As the plant comes out of dormancy the bud will begin to grow into a new branch just as if it is still attached to the parent plant, except that now it is going to grow upright and form the stem of a tree.
When this new growth reaches a height of 3 to 4 feet, clip the tip off, this will force it to start putting on lateral branches. Once these lateral branches are 18� long or so, you can remove all the growth from the stem below where the lateral branches start. Now the plant should look like a beautiful little tree. And that makes you the proud parent!
geezer
Well-Known Member
Thanks for the info smstone22 With a little luck I WILL have a multi-colored dogwood! Went to freeplants and it appears to be very simple, cant wait to try it hope to have pics at a later date.
After you get it done just be sure to keep it pruned during the following years and you will have a multi color dogwood for the life of the plant. Whichever is more vigorous (probably the original plant) will try to take over the graft or bud. Little bit of pruning and no worries though.
