Remington 700ml smokeless build

[hunter0925]

I have a Remington 700ml 45caliber that was built by Shultz Precision earlier this year. It is a Boyds laminate pepper gray stock (I bedded it and won't lie, it's the ugliest bedding job I have done but it is functional and the ugly can only be seen when it's out of the stock). It has a trigger tech primary trigger set at 2.5lbs, Talley picatinny 2 piece bases, trued 700ml action, brux barrel cut at 23 inches and threaded with an attached ramrod. The action and barrel were nitrided. Now, I got this gun and got it together right before muzzleloader started. I didn't have the time to play with loads but got it shooting roughly a 2 inch groups at 100 yards with 200sst and 195 Barnes and h4198. I wasn't satisfied with the groups so I ordered a box of Arrowhead 275NSR bullets but realized they still needed to be sized for this barrel. Fullstream was kind enough to size some for me and the correct sizing diameter is .4495. Steve was only sizing 2 at a time for me to check seating (thanks again man) but I never got enough sized to check accuracy of a full bore load. I didn't like the ramrod that Shultz provided so I cut down the ramrod from my TC Omega and put the correct seating jag on it which will be provided. I will throw in the box of 275NSR, a new bag of blue harvester sabots and a box of 200gr sst. I also have a spare vent liner bushing new in the bag that will go with it. Asking $1350 (have over 2k in it) and would prefer to meet ftf but can likely find a ride. Pm here will work or text is fine. 4two3 six05 seven3zero9 Daniel.

Price drop to $1300. Need to move this.

 

[hunter0925]

Tried including the only scratch I could find in the pic. I did hunt with it and kill a few deer this year so I can't guarantee I didn't miss anything.

 

[ratsnakeboogy]

I have a Remington 700ml 45caliber that was built by Shultz Precision earlier this year. It is a Boyds laminate pepper gray stock (I bedded it and won't lie, it's the ugliest bedding job I have done but it is functional and the ugly can only be seen when it's out of the stock). It has a trigger tech primary trigger set at 2.5lbs, Talley picatinny 2 piece bases, trued 700ml action, brux barrel cut at 23 inches and threaded with an attached ramrod. The action and barrel were nitrided. Now, I got this gun and got it together right before muzzleloader started. I didn't have the time to play with loads but got it shooting roughly a 2 inch groups at 100 yards with 200sst and 195 Barnes and h4198. I wasn't satisfied with the groups so I ordered a box of Arrowhead 275NSR bullets but realized they still needed to be sized for this barrel. Fullstream was kind enough to size some for me and the correct sizing diameter is .4495. Steve was only sizing 2 at a time for me to check seating (thanks again man) but I never got enough sized to check accuracy of a full bore load. I didn't like the ramrod that Shultz provided so I cut down the ramrod from my TC Omega and put the correct seating jag on it which will be provided. I will throw in the box of 275NSR, a new bag of blue harvester sabots and a box of 200gr sst. I also have a spare vent liner bushing new in the bag that will go with it. Asking $1350 (have over 2k in it) and would prefer to meet ftf but can likely find a ride. Pm here will work or text is fine. 4two3 six05 seven3zero9 Daniel.

That is a steal for that build.

 

[fullstream]

Beautiful gun that is begging to shoot those 275's a long ways.
Top notch seller buy with confidence.

 

[Hduke86]

@Pilchard here's the gun you need for that out of state hunting next year

 

[Urban_Hunter]

I'm interested…

I thought NSR bullets we're barrel specific and weren't supposed to be sized? Did you order the wrong size or do I not understand the bullets correctly?

 

[MUP]

Buy with complete confidence! Dan is top tier!

 

[hunter0925]

I'm interested…

I thought NSR bullets we're barrel specific and weren't supposed to be sized? Did you order the wrong size or do I not understand the bullets correctly?

From what I read on Arrowhead site before I ordered you are correct. They have a small and large size. I ordered the smalls and even though their site says they will fit a brux barrel without sizing it did not work out that way for me.

 

[Sgoodman]

What's it weigh?

 

[hunter0925]

What's it weigh?

I just moved and I don't even have a bathroom scale here. It isnt super lightweight but I think it points and balances extremely well.

 

[hunter0925]

I just moved and I don't even have a bathroom scale here. It isnt super lightweight but I think it points and balances extremely well.

I will say that I feel like it is lighter than my TC Omega.

 

[Pilchard]

@Pilchard here's the gun you need for that out of state hunting next year

It sure would do the trick!

 

[hunter0925]

Ttt

 

[EastTNHunter]

Bump

 

[hunter0925]

Had a few ask about weight. I don't have a scale here but talked to a friend that had a nearly identical build and his was 9.25 bare rifle.

 

[hunter0925]

I have some stuff I need to do so let's get this thing moved. $1300 will take it and everything listed with it. May also take partial trades with boot added.

 

[hunter0925]

I'm going to bump this one last time and do $1275 before I cross post. I don't want to deal with shipping through an FFL so this is the last chance here.

 

[Tims Smokless]

The action is a Remington 700 ML (muzzleloader) no FFL required to ship.

 

[hunter0925]

The action is a Remington 700 ML (muzzleloader) no FFL required to ship.

I was under the impression it still needed one. I appreciate it.

 

[Uncle J]

Free bump for a good deal!