57bear
Well-Known Member
Went and bought me a quad 400. Any pointers on this xbow. Shot it this afternoon and really liked it. Just have to tweek it a little bit.
quad 400
- Thread starter 57bear
- Start date
BlackBelt
Well-Known Member
I love mine. Its a good reliable and accurate crossbow. I dont have any tips particular to the quad 400, but its a lot of fun.
bigtex
Well-Known Member
Just like any Xbow, keep the string well waxed and the rail lubed good.
Rubberduck270
Well-Known Member
Make sure you blue Locktite ALL the bolts before you worry about sighting it in. Scope rail, bases and all the other screws on it. They will work loose without locktite.
LanceS4803
Well-Known Member
What Rubberduck said.
Previous owner lost one of the bolts holding the foot stirrup on.
Also, check the rubber coated metal tab used to hold down the rear of the bolt. The rubber was torn on mine, so I took it off to redip it. Found that the original mounting holes were not drilled correctly, so the tab would not lay flat under the scope mount. A couple of minutes with a rat-tail filed fixed it. (Now I know why the previous owner sold it, he couldn't keep a scope zero on it.)
Previous owner lost one of the bolts holding the foot stirrup on.
Also, check the rubber coated metal tab used to hold down the rear of the bolt. The rubber was torn on mine, so I took it off to redip it. Found that the original mounting holes were not drilled correctly, so the tab would not lay flat under the scope mount. A couple of minutes with a rat-tail filed fixed it. (Now I know why the previous owner sold it, he couldn't keep a scope zero on it.)
57bear
Well-Known Member
Yea I found out about the loosening up real quick. Got me some blue to take care of that. thanks yall.
Legnip
Well-Known Member
Don't worry about the Loc-Tite, just get you some duct tape.... :d
