Food Plots One pass and ready to plant sunflowers

Tennessee Deer Sporting & Deer Hunting Community Forum

Help Support TNDeer | Tennessee Deer:

Can you send a before and after picture of the field using the crimper? I'd like to see the results. Thanks

dw
 
DavidW":3gzk9j51 said:
Can you send a before and after picture of the field using the crimper? I'd like to see the results. Thanks

dw

No problem, I just test ran it about 5 minutes yesterday, just to see how it would work

I have one minor adjustment to make, plus I now see that I don't need the drag board on the scratcher do-all.

It will be a few days before I run it again, we have a few days of rain in the forecast

I will post a picture then
 
Thanks, I've been looking at a crimper, but haven't seen a rig like you have. Is that your design? Future thanks for sending the pics.
 
Do your do-all breaks ground enough that you dont have disk first??

I guess you probably have alot better dirt than where I am. Mine just bounces on top. Too much clay I guess.

Those rollers are a great idea and addition.

Who's manufacturer??
 
As an Amazon Associate we earn from qualifying purchases. Product prices and availability are accurate as of the date/time indicated and are subject to change.
jmb4wd":2e6cbif2 said:
Do your do-all breaks ground enough that you dont have disk first??

I guess you probably have alot better dirt than where I am. Mine just bounces on top. Too much clay I guess.

Those rollers are a great idea and addition.

Who's manufacturer??

Dirt is decent here.
Originally I would disc then come back and do-all
When I went to incorporating Treflan into the top 2 inches of soil, I would double do-all every field just toget the cosmetic look I wanted.

Then the idea of the roller crumbler hit me when looking at the large farming operations in my area.

I found the attachment at an fabrication shop in Hull Iowa

TEE SLAA MFG CO. 1.712.439.6718

$1000.00 each for the rollers, a little over $700.00 to ship them to me.

2 good days to mount them on a very solid frame
 
A person could get by with 2 rollers instead of 3 in my case.

I just didn't want the little strip between 2 close mounted rollers leaving the little strip that separates the two rollers
 

Latest posts

Back
Top