Newby Question

[batten_down]

When it comes to reloading, I'm a newby; green as they come. But I want to get into it. I want to reload for 6.5G.

Not counting bullet components, how much do I need to budget for the tools to do the job right? Assuming I get what I need and get setup to reload for the Grendel, what would I then need to reload for 270wsm?

I want to get into this, I feel like I'm already late to the party. I'm pretty sure this is what Santa will be bringing me this year. Any help and/or advice or guidance, is definitely appreciated.

 

[MUP]

This might be a good start.

https://www.brownells.com/reloading...reloading-kit-sku430101202-146428-300060.aspx
Then powder, primers, projectiles will be the tougher items to procure currently. And a good reloading manual or three.

 

[batten_down]

This might be a good start.

https://www.brownells.com/reloading...reloading-kit-sku430101202-146428-300060.aspx
Then powder, primers, projectiles will be the tougher items to procure currently. And a good reloading manual or three.

Thank you for that.
So the kit that you linked to, can handle both calibers I referenced without any additional tools? Anything else I need to get started? I thought it might cost me a grand or more to get going. This doesn't look bad at all.

 

[Jcalder]

Start with a manual. Read it a few times and decide if you want to chase that rabbit.

That link mup sent is a good deal on kit. You'll need die sets for each caliber, and possibly a few miscellaneous items but you'll be on your way to start loading.

 

[MUP]

Yes, you need the caliber specific die sets for any caliber you choose to load for as well.

 

[MUP]

Start with a manual. Read it a few times and decide if you want to chase that rabbit.

That link mup sent is a good deal on kit. You'll need die sets for each caliber, and possibly a few miscellaneous items but you'll be on your way to start loading.

That's the same one you posted in the Deals forum buddy.

 

[batten_down]

Start with a manual. Read it a few times and decide if you want to chase that rabbit.

That link mup sent is a good deal on kit. You'll need die sets for each caliber, and possibly a few miscellaneous items but you'll be on your way to start loading.

Im a reader. I was looking at the reloaders Bible. Is this a good starting point for someone new, or is there a better starting point, in your opinion?

 

[MUP]

Dial calipers, digital grain weight scales, even if beam/balance scales are included in the kit I recommend getting a digital scale.

 

[Jcalder]

Couple things that kit is missing….
Trimmer. You'll eventually need one. They can be as cheap as $4-5 to $200+.

Tumbler. Not really needed, but I don't want my ammo looking like it shoots.

Calipers. You'll want a decent set, preferably a good set.

 

[MUP]

The reloading manuals give you the information for each caliber, such as powder recommendations and bullet weight combinations to use as a starting point. Reading is good. I have 4 different manuals, and will get more as I go on eventually.

 

[Jcalder]

Im a reader. I was looking at the reloaders Bible. Is this a good starting point for someone new, or is there a better starting point, in your opinion?

I've not read the reloaders Bible, so I can't say either way. I do like the Lyman's book, currently have 2 Hornady manuals, and several powder manufacture manuals.

 

[MUP]

Lyman Reloading manual, Lee, Hornady, Speer...several to choose from.

 

[Jcalder]

Lyman Reloading manual, Lee, Hornady, Speer...several to choose from.

The Lee is supposed to be one of the better ones

 

[MUP]

You'll also need a good bench and space to do your loading at. Quiet, where you can concentrate on loading precisely, and keep your mind on what you're doing. You will be working with explosives after all.

 

[DaveTN]

Any help and/or advice or guidance, is definitely appreciated.

I would see if you can buy the primers you want first. I wish I had done that.

 

[DaveB]

6.5 bullets are starting to show up. What you want to do is read up on the grendel and try to discover what bullet weight and type flies best, There may be two standouts.....or a dozen. If you are gonna kill deer you want to narrow your selections to those bullets that perform best at killing deer. Hornady makes a few, as does Nosler. Lots of folks like Sierra or Barnes or Berger. Go slow and be very direct and specific in what you are doing.

There is no such thing as "Just about". Everything is exact. It has to be that way because of what you are doing AND you want your work to be repeatable.

For your Grendel or 270WSM you need a set of dies (RCBS). A shell holder. Large rifle primers. A dial or digital caliper. A press. A scale.

It is a great hobby. Keeps you out of trouble.

 

[Jcalder]

6.5 bullets are starting to show up. What you want to do is read up on the grendel and try to discover what bullet weight and type flies best, There may be two standouts.....or a dozen. If you are gonna kill deer you want to narrow your selections to those bullets that perform best at killing deer. Hornady makes a few, as does Nosler. Lots of folks like Sierra or Barnes or Berger. Go slow and be very direct and specific in what you are doing.

There is no such thing as "Just about". Everything is exact. It has to be that way because of what you are doing AND you want your work to be repeatable.

For your Grendel or 270WSM you need a set of dies (RCBS). A shell holder. Large rifle primers. A dial or digital caliper. A press. A scale.

It is a great hobby. Keeps you out of trouble.

Unless you use 7.62x39 brass, Grendel takes small rifle primers. The next question becomes do you use regulars or magnums, a lot of data out there uses magnum primers.

 

[batten_down]

Lyman Reloading manual, Lee, Hornady, Speer...several to choose from.

I've got the Lee manual coming. Be here tomorrow. Down the rabbit hole I go...

Thanks for the help guys. I'm all ears for any and all advice, comments, and anything else relevant to helping me get started. All good stuff.

 

[Jcalder]

If at all possible, find someone local to help you. Ask questions. You might think it's dumb but losing your fingers or face is worser.

 

[batten_down]

If at all possible, find someone local to help you. Ask questions. You might think it's dumb but losing your fingers or face is worser.

I don't think it's dumb at all. I'm a visual learner too. So, if anyone within an hour or so of Clarksville is setup to reload and wouldn't mind me coming by and picking their brain a little, and checking out their setup. Please PM me.

 

[markwondi]

I have 270 wsm dies in the classifieds if you're interested

 

[EastTNHunter]

Chronograph. If you are loading 6.5G in an AR you will need it. Ready up on pressure washing signs for that cartridge before starting. Sounds like bunk, but there are some specific things about that cartridge in the AR platform that make it more idiosyncratic and sensitive to pressure signs. If you see much in the way of traditional pressure signs then you are already too far. Most problems come when people try to make the 6.5G the 6.5C. It's not a burner, so don't make it one.

 

[DaveTN]

I don't think it's dumb at all. I'm a visual learner too. So, if anyone within an hour or so of Clarksville is setup to reload and wouldn't mind me coming by and picking their brain a little, and checking out their setup. Please PM me.

You are lucky; besides Midsouth Shooters Supply, you have Tennessee Gun Country, 1435 Fort Campbell Blvd. The owner David Bata helped me acquire some powder when I was getting started. You might want to go in there and check them out.

 

[fullstream]

I started a couple years ago and was fortunate I had a buddy who has loaded for 20 years. The forum has been a blessing for me as the guys in here will answer any questions I've had. Good luck, I've been frustrated at times and also rewarded with the best groups ever.

 

[backyardtndeer]

This might be a good start.

https://www.brownells.com/reloading...reloading-kit-sku430101202-146428-300060.aspx
Then powder, primers, projectiles will be the tougher items to procure currently. And a good reloading manual or three.

Some really good prices on those kits and presses. I seriously considered adding a press with the rockchucker being only $89.

A lot of good advice given. I don't load for either of those, so have no recommendations on powder. Starline had 6.5 grendel brass available for backorder a few days ago, doubt it is still available, but would be worth checking. When they have it for backorder, you can place your order and you will usually get your brass inside a week to ten days.

Midsouth is great. You can order with them and modify your order, they will hold your items and you can pick up in store. Wish they were closer to me.