Ive got mine set up for 30-06, 243, 30Carbine, 44mag and 9mm.
All of my dies are loaded into the individual turret rings...lock it in, verify and load.
I initially purchased the kit that came with the Auto-Disk Powder Measure and was having problems getting the charge that I want. Im waiting on the Auto-Disk Adjustable Powder Charge Bar that should give me the exact(close)powder measure that I want. The auto disks either needed to be reamed or filled with nail polish for fine tuning. With the charge bar, just turn the screw.
Ive also purchased the Auto-Disk Powder Measure Riser to get powder measure up above the depriming/sizing die...could screw it in unless I removed two dies...so switching the powder measure to another set of dies was a pain in the butt.
So, to solve all of my problems, my 9mm dies and 30 carbine die set ups will have seperate powder measures, with the adjustable charge bars, and risers. Should make loading those two calibers in mass a snap.
44Mag I use another powder measure or weigh the powder...rifles, weigh the powder for each charge.