H4350 coming back

Tennessee Deer Sporting & Deer Hunting Community Forum

Help Support TNDeer | Tennessee Deer:

jakeway

Well-Known Member
Bronze Member
Joined
Nov 22, 1999
Messages
3,945
City & State/Province
Hendersonville, TN, USA
I've seen it on the shelves at two different places in the past couple weeks. A small indoor gun range in Gallatin and at Cabela's in Bowling Green.

Just sayin'.
 
When I was looking for some, I joined every in-stock notification I could find on the internet and had an 8-lb jug within a week.
 
Have to buy it in conjunction with your hand loader buddies so you can water down the Haz Mat fee.
 
As an Amazon Associate we earn from qualifying purchases. Product prices and availability are accurate as of the date/time indicated and are subject to change.
Bass Pro Pyramid......$39.99
YcoTBRL.jpg


Avery Outdoors.......$36.99
NnrfzCa.jpg
 
online sites i checked were back to "out of stock".

Interestingly a lot of powders are at lowest price level I have seen in many a year.

IMR4350 is 23.99 a pound

But RL15 is not in stock.

So depending upon your needs there are some powders available at good prices. Others are Giraffe lips high or not in stock.
 
$23.99 or so ain't to bad but, when it gets to around $40.00 that's a little rough. I like IMR4350 too. I've never tried Hodgdon H4350. I hear good things though.
 
EastTNHunter":15b3tzgf said:
280longshot":15b3tzgf said:
Just scored on (4) cans of H4350 at $21.00/ lb



Sent from my SM-G900V using Tapatalk

Might want to buy some lottery tickets
Well my buddy works at a sporting goods store and hooked me up I must say.

Sent from my SM-G900V using Tapatalk
 
Varget made my T/C Venture .308 accurate after over a year of testing.

This rifle will not shoot 125, 150, 165, 168, or 180 gr bullets using almost any powder you name at SAAMI length 0f 2.810.

This works: 44.5 gr of Varget; Federal 210M primer; FC brass(small-base FL sized); 150 gr Accubond seated at exactly 2.825.

If you seat the round any deeper the accuracy vanishes.

I can't seat it out any longer-I arrived at this length only because that is longest round that will fit in the magazine. At this length the magazine is brushing the tip of the Abond. I grabbed my B&D variable speed chucked in a teeny bit and oh so carefully made contact between bit and this piece of plastic that is there I dunno why. Just enough extra room to let the bullet pass unmolested.

Thanks again for the tip. I am not a fan of Varget and only have a single one-pound can in inventory. Should last this season at least.
 
DaveB":rl3gh3bm said:
Varget made my T/C Venture .308 accurate after over a year of testing.

This rifle will not shoot 125, 150, 165, 168, or 180 gr bullets using almost any powder you name at SAAMI length 0f 2.810.

This works: 44.5 gr of Varget; Federal 210M primer; FC brass(small-base FL sized); 150 gr Accubond seated at exactly 2.825.

If you seat the round any deeper the accuracy vanishes.

I can't seat it out any longer-I arrived at this length only because that is longest round that will fit in the magazine. At this length the magazine is brushing the tip of the Abond. I grabbed my B&D variable speed chucked in a teeny bit and oh so carefully made contact between bit and this piece of plastic that is there I dunno why. Just enough extra room to let the bullet pass unmolested.

Thanks again for the tip. I am not a fan of Varget and only have a single one-pound can in inventory. Should last this season at least.
Talk about a pain in the butt...Glad you got it shooting. If you need Varget, I have plenty.


Sent from my SM-G900V using Tapatalk
 

Latest posts

Back
Top