mr.big
Well-Known Member
Savage 110 FCP-HS Precision 338 Lapua,,3.5-10x50 VariX-III,on an EGW 20 MOA rail,in Burris rings with another 15 MOA taper in the inserts.
after taking everything apart and putting it back together with BLUE loctite,and let it cure for three days,I was getting anxious to have it zeroed at 100 with a mid range load with my starting off handloads.
bore sighted by eye off a rest at 100 yards ,I started with 88 grs H1000 and the 300 gr Scenar bullet in brand new Lapua cases,,and was 6 inches low and 3 inches right,,everything functioned really smooth and I was on the 1 inch red dot with the 3rd shot,,
the next three rounds I shot with no adjustments on the gun,but with 89 grs of H1000,Fed 215 primers,new Lapua cases,and the 300 gr Scenar bullet,,
I didn`t measure it but I am really tickled with the first three shot group at 100 yards and feel pretty good about finding a load that the Savage rifle will shoot.
after taking everything apart and putting it back together with BLUE loctite,and let it cure for three days,I was getting anxious to have it zeroed at 100 with a mid range load with my starting off handloads.
bore sighted by eye off a rest at 100 yards ,I started with 88 grs H1000 and the 300 gr Scenar bullet in brand new Lapua cases,,and was 6 inches low and 3 inches right,,everything functioned really smooth and I was on the 1 inch red dot with the 3rd shot,,
the next three rounds I shot with no adjustments on the gun,but with 89 grs of H1000,Fed 215 primers,new Lapua cases,and the 300 gr Scenar bullet,,
I didn`t measure it but I am really tickled with the first three shot group at 100 yards and feel pretty good about finding a load that the Savage rifle will shoot.