Fiberglass Repair Needed

[B.D.]

Who does good fiberglass boat repair in the Nashville area? I had used T&K Boat Repair a few times in the past, but nobody's answering their phone and I think they may have gone out of business.

I've got some damage to the side of my hull - a golf ball sized hole about an inch above the water line - and I want it repaired well.

I'd rather pay a little more and have the repair really look good instead of saving a few bucks and having it look lousy.

bd

 

[Unicam]

For a 1" hole find someone that has a Blade or Vacuum repair kit and knows how to use it. It does an awesome job of blending the repair into existing material! Also look at Composite repair facilities, they have the same tools.

 

[gil1]

Tell the story numnuts. You're not getting off that easy!

 

[B.D.]

What story? Maybe it's just "mystery damage." :whistle:

bd

 

[rsimms]

I hear a mad kayaker took a potshot at him in the fog. ;)

 

[Rackseeker]

Genesis fiberglass concepts 1-931-967-7062

 

[FLIPPER]

For a 1" hole find someone that has a Blade or Vacuum repair kit and knows how to use it. It does an awesome job of blending the repair into existing material! Also look at Composite repair facilities, they have the same tools.

Disagree...


Only works if your boat was mold injected to begin with, not if it was hand laid or shot with a chopper gun.

Been building boats since 1987. ;)

 

[Rackseeker]

For a 1" hole find someone that has a Blade or Vacuum repair kit and knows how to use it. It does an awesome job of blending the repair into existing material! Also look at Composite repair facilities, they have the same tools.

Disagree...


Only works if your boat was mold injected to begin with, not if it was hand laid or shot with a chopper gun.

Been building boats since 1987. ;)

What kind of boats do you build?

 

[bigluresonly]

I heard a big striper made a tuna run directly into the boat :o

 

[Unicam]

For a 1" hole find someone that has a Blade or Vacuum repair kit and knows how to use it. It does an awesome job of blending the repair into existing material! Also look at Composite repair facilities, they have the same tools.

Disagree...


Only works if your boat was mold injected to begin with, not if it was hand laid or shot with a chopper gun.

Been building boats since 1987. ;)

Yessir.

 

[gil1]

I heard there's a beeg ole hunk of fiberglass floating around in the Caney Fork. Some Mow Ron plowed into a tree! :D

 

[7mm08]

So the kype on the brown trout knocked a hole in your boat?

 

[Knuckles]

David@ Fourcorners Fiberglass is the best around. Give him a call 615-641-2252.

 

[B.D.]

Thanks to all who made suggestions.

bd