Excalibur String question

[Yotekiller011]

So, I unstrung my Crossbow and didn't put tape on the string before I took it off at the end of last season.
How many twist should I put back in it before I put it back on the limb?

Thanks, Dave

 

[TnTurk]

Flemish string or stock endless loop?

 

[Gmed]

Does it not have a mark on the barrel that the string is supposed to come to? I think mine does but they are both older models. You twist the string until when strung, it rests on the mark on the barrel. If it's too short, and comes past the mark, take out a twist and if too long, add.

 

[Yotekiller011]

I just remembered that red line. I'm getting old brother. Thankd

 

[marty d]

Super simple look up your bow on Excalibur's website and get the brace hight. It'll be like 2 1/2 to 3 or 3 1/2 to 4 depending on which crossbow you have. I mark mine with a small sharpie on the rail so I know the string is exactly where the factory specs say it should be. If you're shooting your Excalibur a lot and you start zinging them higher chances are your string is stretched a little bit and it'll be too far forward needs a twister to put in it.