$150.00. 91x34.5 inch frame , rollers are about 82 inches wide.This is a cultipacker that I reworked and running the axles in 2-2.5 x 6 inch oak. Bolted to the frame. Holes drilled to use a grease needle to shoot grease in. I have used this two years now since fixing it this way on about two acres each year. Might not want to do a lot of acres , but should work fine for food plots. When and if they wear through , you can replace with more oak. Two bolts on each end secure the oak to the frame.The old grease caps were wore through and one of the cast iron end frame pieces finally broke to pieces and this was my solution. I was going to get it to my brothers shop years ago and turn the axles down for bearings and holders but life got in the way.