Antler Mounts

Tennessee Deer Sporting & Deer Hunting Community Forum

Help Support TNDeer | Tennessee Deer:

String Music

Well-Known Member
Joined
Sep 24, 2007
Messages
3,233
City & State/Province
Knoxville
What do y'all do with the antlers off bucks you don't get shoulder mounted? My wife isn't crazy about European mounts as she thinks they're creepy. I have a couple racks that I may just go old school antler/plaque route. Who makes a good one?


Sent from my iPhone using Tapatalk
 
I'm not much help because I love euro mounts and we have them laying all over the house so guests can pick them up and I can tell my stories. But, I used to do the skull cap and plaque mounts quite a bit. I'd cut the skull flush and leave a long section down its nose, clean it real good and let it dry. Once dry, I'd stain it to match a walnut board. Then I'd go to a lumber supply store and get a piece of walnut and cut it to the shape I want, round the edges with sandpaper and screw the antlers on. It's really a pretty simple project.

The plaques just sit in the attic now. I'm lucky that my wife likes the euros.
 

Attachments

  • 20191214_073940.jpg
    20191214_073940.jpg
    45.7 KB
I bought a dremel and started making stuff out of mine.You will need a few more tools.But you will figure out what you need.
Whine racks
Nobs and handles for cabinets
knife handles
Pipes
You will be surprised what all you can come up with when you start doing it.i have made a lot of things out of them this is just a few.
 
Buzzard Breath":9va1mxll said:
I'm not much help because I love euro mounts and we have them laying all over the house so guests can pick them up and I can tell my stories. But, I used to do the skull cap and plaque mounts quite a bit. I'd cut the skull flush and leave a long section down its nose, clean it real good and let it dry. Once dry, I'd stain it to match a walnut board. Then I'd go to a lumber supply store and get a piece of walnut and cut it to the shape I want, round the edges with sandpaper and screw the antlers on. It's really a pretty simple project.

The plaques just sit in the attic now. I'm lucky that my wife likes the euros.

That is a true euro mount where the skull is split below the eye bone to nasal cavity. That is a difficult cut to make too. Europeans have been doing a similar mount minus the stain for centuries. This is one of the hottest trends in decorating.

My wife is the opposite. She hates creepy full skull euros but likes the antler plaques.
 
I just did a few that were in the freezer and hung them over the couch in the basement.
The wife and kids do not approve. They also think they are creepy.
 

Attachments

  • 5557ED5D-8010-41BD-971F-407E0357761F.jpeg
    5557ED5D-8010-41BD-971F-407E0357761F.jpeg
    51 KB
As an Amazon Associate we earn from qualifying purchases. Product prices and availability are accurate as of the date/time indicated and are subject to change.
Trophy trees are [emoji41]
I will try and snap a picture of skull hookers skull plate bracket. It's a different way to hang a non skull mount, I think they even make a metal bracket that goes over it. I'm not a huge fan but they have their place.
I personally like the leather covered cap on a wood plaque. I don't have any but it's very nostalgic and pretty tasteful. Now that DYI American euros are a PITA to do now on out of state hunts I will likely start doing the leather covered types. Assuming I get lucky and kill one.
190d378d9212cdc1f5809fca085a01d2.jpg



Sent from my iPhone using Tapatalk
 
Here is the skull hooker bone bracket. You can adjust the bracket up and down and the main bracket swivels as well. I'm pretty positive they make a metal plate to lay over the skull cap.

2f2ba97cd5a9ed68c36c53e661be580c.jpg


Underside view
de328b5a5599fd56eb818f1c7a874be4.jpg


Sent from my iPhone using Tapatalk
 
url]
BULL MOOSE":dg14dc0o said:
Buzzard Breath":dg14dc0o said:
I'm not much help because I love euro mounts and we have them laying all over the house so guests can pick them up and I can tell my stories. But, I used to do the skull cap and plaque mounts quite a bit. I'd cut the skull flush and leave a long section down its nose, clean it real good and let it dry. Once dry, I'd stain it to match a walnut board. Then I'd go to a lumber supply store and get a piece of walnut and cut it to the shape I want, round the edges with sandpaper and screw the antlers on. It's really a pretty simple project.

The plaques just sit in the attic now. I'm lucky that my wife likes the euros.

That is a true euro mount where the skull is split below the eye bone to nasal cavity. That is a difficult cut to make too. Europeans have been doing a similar mount minus the stain for centuries. This is one of the hottest trends in decorating.

My wife is the opposite. She hates creepy full skull euros but likes the antler plaques.

I have several of my grandfather's Roe buck euro mounts from his time in Germany following the war....that's him in picture smoking the pipe....and in preview I see pic is sideways.... sorry can't figure out to turn it? ....I would actually love to have a roe buck cape to shoulder mount one if his racks.
 

Attachments

  • 1576355679272440206323337805814.jpg
    1576355679272440206323337805814.jpg
    42.3 KB
AT....l love the trophy tree! (Nice mulies) and the skull hooker looks good too! Not sure my wife would go for the trophy tree....but thankfully she's cool with skulls and deer heads on wall.
 
DoubleRidge":1mruvu7g said:
I have several of my grandfather's Roe buck euro mounts from his time in Germany following the war....that's him in picture smoking the pipe....and in preview I see pic is sideways.... sorry can't figure out to turn it? ....I would actually love to have a roe buck cape to shoulder mount one if his racks.

What you have is epic gold and if I had a roe cape I would gift it to you.

My granddad and I killed two nice muleys this year together and my gift to him is to do a special double pedestal mount.


Sent from my iPhone using Tapatalk
 
AT Hiker":2y355oeg said:
DoubleRidge":2y355oeg said:
I have several of my grandfather's Roe buck euro mounts from his time in Germany following the war....that's him in picture smoking the pipe....and in preview I see pic is sideways.... sorry can't figure out to turn it? ....I would actually love to have a roe buck cape to shoulder mount one if his racks.

What you have is epic gold and if I had a roe cape I would gift it to you.

My granddad and I killed two nice muleys this year together and my gift to him is to do a special double pedestal mount.


Sent from my iPhone using Tapatalk

Thanks....those little Roe Buck horns are very special to me....I have four sets of them..... someday maybe I can hook up with a replacement cape.

Your idea of a double pedestal mount sounds awesome...please post some pics once it's completed....would love to see it.
 
I only have one euro mount I did a few years ago and the others are just skull caps. My wife actually loves them and wants me to do another euro for decoration. She has 2 that are just the skull cap as decoration on our dining room table.
 
I always preferred just the skull cap like I've seen on many tradition European mounts. If you are handy with craving you can decorate them up with carvings of oak leaves and acorns and such like seen on a lot of the antique plaques....I think you can order them precarved like that.
 

Attachments

  • 20191215_112721.jpg
    20191215_112721.jpg
    28.1 KB
Wobblyshot1":1u0v3g5u said:
I always preferred just the skull cap like I've seen on many tradition European mounts. If you are handy with craving you can decorate them up with carvings of oak leaves and acorns and such like seen on a lot of the antique plaques....I think you can order them precarved like that.
So, uh, you shoot that sucker in the head? Gotta be a story there.


Sent from my iPhone using Tapatalk
 
AT Hiker":2pggpfru said:
Trophy trees are [emoji41]
I will try and snap a picture of skull hookers skull plate bracket. It's a different way to hang a non skull mount, I think they even make a metal bracket that goes over it. I'm not a huge fan but they have their place.
I personally like the leather covered cap on a wood plaque. I don't have any but it's very nostalgic and pretty tasteful. Now that DYI American euros are a PITA to do now on out of state hunts I will likely start doing the leather covered types. Assuming I get lucky and kill one.
190d378d9212cdc1f5809fca085a01d2.jpg



Sent from my iPhone using Tapatalk

Love the trophy trees and plan on strictly using one in the future. Just dust ever so often, seems simple. I love mounts, but for what they cost now, I'll never have another mounted.
 
Stykbow":2hmqn16g said:
Wobblyshot1":2hmqn16g said:
I always preferred just the skull cap like I've seen on many tradition European mounts. If you are handy with craving you can decorate them up with carvings of oak leaves and acorns and such like seen on a lot of the antique plaques....I think you can order them precarved like that.
So, uh, you shoot that sucker in the head? Gotta be a story there.


Sent from my iPhone using Tapatalk

Thought I was going to get an easy broadside shot when suddenly he turned up the hill coming straight toward me. I was on the ground and busted but touched her off the moment before he broke and ran. In short it was the only shot I had. If you look close you can see the flattened ball through the hole which I recovered in the neck...570 ball ahead of 82 grs black powder at about 30 yards. I thought it would make a neat euro.
 
Wobblyshot1":2vxfs6qw said:
I always preferred just the skull cap like I've seen on many tradition European mounts. If you are handy with craving you can decorate them up with carvings of oak leaves and acorns and such like seen on a lot of the antique plaques....I think you can order them precarved like that.


This is amazing!
 
Gravey":2wjlnvqm said:
I only have one euro mount I did a few years ago and the others are just skull caps. My wife actually loves them and wants me to do another euro for decoration. She has 2 that are just the skull cap as decoration on our dining room table.


That is a great looking table display. She does not we mind the hair on one. :)
 
Wobblyshot1":27y8iake said:
Stykbow":27y8iake said:
Wobblyshot1":27y8iake said:
I always preferred just the skull cap like I've seen on many tradition European mounts. If you are handy with craving you can decorate them up with carvings of oak leaves and acorns and such like seen on a lot of the antique plaques....I think you can order them precarved like that.
So, uh, you shoot that sucker in the head? Gotta be a story there.


Sent from my iPhone using Tapatalk

Thought I was going to get an easy broadside shot when suddenly he turned up the hill coming straight toward me. I was on the ground and busted but touched her off the moment before he broke and ran. In short it was the only shot I had. If you look close you can see the flattened ball through the hole which I recovered in the neck...570 ball ahead of 82 grs black powder at about 30 yards. I thought it would make a neat euro.
Cool story and you were right. It made a really cool euro.


Sent from my iPhone using Tapatalk
 

Latest posts

Back
Top