This week...
I pushed through 950 9mm rounds
tumbled over 700 bottleneck brass, picked corn cob out the primer pocket, primered all of them with Fed210M's.
loaded 72 rounds of 9 using different powders and charge weights. Looking for an accuracy point.
Loaded 25 6.8 SPC rounds and did brass prep on a net total of 100.
Son is wanting to shoot 400 yards at MSSA so we got some VLD Bergers and new match-grade brass headstamp ABM. That is when I hit problems. The primer pocket was NOT round; I don't mean to say it was oblong but with my RCBS primer press i had to use TWO hands to seat the primer. I did 5 of these and that was it, I broke out my variable B&D, clamped it down, got it turning, and made everything right. Then I saw I better chamfer and at least 30% were not round so I took all 100 and ran them through the .308 FL die then chamfer then tumble, then pick, then seat primers. The SPC brass was from Starline and every piece was load-ready.
A busy week but very productive