300 wm parts

[diamond hunter]

Im wanting to reload 300wm the most. From those experienced can you give me a brand of primer and a brand of powder and a bullet thats the very best?Im wanting to start looking to buy these parts.Im basically just looking for a great round out to 300 yards.Whats the best components on 300wm?

 

[ADR]

Im wanting to reload 300wm the most. From those experienced can you give me a brand of primer and a brand of powder and a bullet thats the very best?Im wanting to start looking to buy these parts.Im basically just looking for a great round out to 300 yards.Whats the best components on 300wm?

What grain and what kind of bullet?
Hard to beat a 180 grain accubond but didn't know if you had one in mind.

 

[diamond hunter]

I dont have one in mind,need suggestions.

 

[nso123]

You will be at the mercy of the powder and primer supply right now. Something like Hodgdon 4831 is a versatile powder that will work in many rifle cartridges with good results. Federal 215 and 215M are my usual magnum rifle primers, but in the current situation you can make most any of the major brand magnum primers work.

 

[fairchaser]

180 grain hornady interlock psp, in front of 72 grains of 4831sc and a CCI large rifle magnum primer will get you about 3000 FPS.

 

[ADR]

I dont have one in mind,need suggestions.

30 Caliber 180gr AccuBond (50ct) (BLEM)

2nds or Cosmetic Blemished: All Nosler products are hand inspected prior to packaging. Every bullet and every piece of brass is searched for imperfections to ensure that every piece meets Noslers strict quality standards. Products with physical imperfections and deformities are scrapped, while...

www.shootersproshop.com

Hard to beat

 

[markwondi]

Berger 215gr
H1000 or VV N570
Fed 215M

Thank me later

 

[diamond hunter]

This is the type information I need thanks

 

[MUP]

My recipe's for my Remington 300 WinMag Sendero are :

180 gr NAB's/NBT's
RL22 (work up for your particular rifle)
CCI LRP

_

220 gr NCC's
H1000 (work up for your particular rifle)
Federal 215 Mag Primers

The RL22 recipe yielded a .44 MOA 3 shot group at 1000 yards, although terminal velocity was below the threshold for hunting performance. It made for a decent target load tho. I would have no hesitation using this load, with NAB's, for hunting out to 600 yards.

 

[DaveB]

My recipe calls for Fed 215M primers.....extremely difficult to find for over 16 months. Regular 215's are almost as impossible.

If you cannot find RL22 then take a hard look at IMR7828; it is one of my favorite powders.

 

[Billboy]

Rl22, IMR 4350, IMR 4831, IMR 7828, and H1000 are all good powders. I personally shoot 180 Accubonds and 168 Barnes TTSX with RL22 and Fed 215M primers.

 

[ADR]

Sierra has an app that has reloading data. It is very helpful in these times of limited availability. If you find a store that has powder you can easily look to see if it is listed in you caliber/bullet selection (just because it isn't listed doesn't mean it will not work though). Here is screen shot of the powders that will get you north of 3000fps according to the app. YMMV