Recent content by markwondi

Thankfully I have a couple kegs of RL23 or I would be hurting.

My suggestion is if you can, run a true ladder anywhere between 400-600 yards, looking at vertical dispersion. Once you find a node with 3-4 consecutive shots with minimal vertical dispersion, hone in on a powder charge in that node and then adjust seating depth.

There’s a bit of vertical in that group, so I would run a ladder with it set at .050” off. You’re outside of a node.

Looking good!

With the velocity you’re at, you shouldn’t have any issues

The 7mm 180 ELD is notorious for it, which is a shame due to its BC. I still use it for hunting but run a much lower velocity node.

Yeah, that’s definitely a downside, along with availability. I like the ELD-M’s for hunting but I’m a Berger fan for LR steel simply because I’ve had too many ELD’s not make it to the target due to their thin jackets. Keeping the rpm below 280,000 is imperative with them.

Those 134’s do fly well, although I’m partial to the Berger 135 LRHT

SPR finished up my 6mm Creedmoor about a month ago and so far during break in, it’s showing promise. I used my custom reamer design for this barrel, which I designed around the Berger 109gr LRHT. Another member used my reamer as well on his build and it hammers with the 75gr hammer HHT’s...

I’m confused with this thread…

It’s a Christensen chamber issue. If you end up rebarreling, I’d be willing to share my custom reamer for use at your gunsmith.

how’s it shoot? Any target pics?

N570 is the ticket.

At least you made it a few weeks with good intentions!

Lot code is the same on all 4 lbs (210016)