Sold/Expired I SO corian or deck board scraps

Coldfusion

Well-Known Member
Joined
Jan 20, 2016
Messages
703
I'm in Murfreesboro and am looking for pieces of corian counter top and composite deck board you may have laying around. I turn my own pot calls so I need dimensions that I end up cutting down to roughly 4x4 blanks with thickness of not less than 1/2 inch. And probably not over 1 inch thick because I don't have a planer. If anyone here does construction or has some of either laying around I'd like to hear what you have and how much you'd like for it. Thank you.

Sent from my SM-N920V using Tapatalk
 

Coldfusion

Well-Known Member
Joined
Jan 20, 2016
Messages
703
WG Taxidermist":21p64g4a said:
How much are you needing?

Sent from my SM-G925F using Tapatalk
Anything really. I make my calls from domestic woods now, but am wanting to try the corian and deckboarding.

Sent from my SM-N920V using Tapatalk
 

WG Taxidermist

Well-Known Member
Joined
Jul 8, 2010
Messages
2,028
Location
Hardin County
Coldfusion":1e793glk said:
WG Taxidermist":1e793glk said:
How much are you needing?

Sent from my SM-G925F using Tapatalk
Anything really. I make my calls from domestic woods now, but am wanting to try the corian and deckboarding.

Sent from my SM-N920V using Tapatalk
I'm not in Murfreesboro but I could probably mail you some if you want. I've got plenty of corian in all different colors.

Sent from my SM-G925F using Tapatalk
 

Coldfusion

Well-Known Member
Joined
Jan 20, 2016
Messages
703
WG Taxidermist":92p3q49d said:
Coldfusion":92p3q49d said:
WG Taxidermist":92p3q49d said:
How much are you needing?

Sent from my SM-G925F using Tapatalk
Anything really. I make my calls from domestic woods now, but am wanting to try the corian and deckboarding.

Sent from my SM-N920V using Tapatalk
I'm not in Murfreesboro but I could probably mail you some if you want. I've got plenty of corian in all different colors.

Sent from my SM-G925F using Tapatalk
PM sent

Sent from my SM-N920V using Tapatalk
 

edtcase

Well-Known Member
Joined
May 6, 2013
Messages
2,509
Location
TN
I have two sheets of this if you can use it.
238c3f2582f58cf9d7c024e80e9b7128.jpg



Sent from my iPhone using Tapatalk
 

Coldfusion

Well-Known Member
Joined
Jan 20, 2016
Messages
703
edtcase":1d09bfq7 said:
I have two sheets of this if you can use it.
238c3f2582f58cf9d7c024e80e9b7128.jpg



Sent from my iPhone using Tapatalk
How thick is it? What part of TN you in?

Sent from my SM-N920V using Tapatalk
 

Coldfusion

Well-Known Member
Joined
Jan 20, 2016
Messages
703
I apologize I misprinted desired thickness. Minimum thickness I need is 3/4 inch. Preferably around 1 inch or a little over is fine.

Sent from my SM-N920V using Tapatalk
 

WG Taxidermist

Well-Known Member
Joined
Jul 8, 2010
Messages
2,028
Location
Hardin County
Sorry. All of mine is 1/2" thick. 3/4" polyboard is about all I've got to offer being that thick.

Sent from my SM-G925F using Tapatalk
 

Coldfusion

Well-Known Member
Joined
Jan 20, 2016
Messages
703
WG Taxidermist":35xc9tk7 said:
Sorry. All of mine is 1/2" thick. 3/4" polyboard is about all I've got to offer being that thick.

Sent from my SM-G925F using Tapatalk
No problem I really appreciate you checking

Sent from my SM-N920V using Tapatalk
 

edtcase

Well-Known Member
Joined
May 6, 2013
Messages
2,509
Location
TN
Just shy of a half inch.


Sent from my iPhone using Tapatalk
 

WG Taxidermist

Well-Known Member
Joined
Jul 8, 2010
Messages
2,028
Location
Hardin County
You know with the proper adhesives you can glue pieces together and turn them. The adhesive matches the corian so you wouldn't see the glue line.

Sent from my SM-G925F using Tapatalk
 

Coldfusion

Well-Known Member
Joined
Jan 20, 2016
Messages
703
WG Taxidermist":zz9mqtkc said:
You know with the proper adhesives you can glue pieces together and turn them. The adhesive matches the corian so you wouldn't see the glue line.

Sent from my SM-G925F using Tapatalk
I'm just learning about corian. What adhesive would be used for best results?

Sent from my SM-N920V using Tapatalk
 

WG Taxidermist

Well-Known Member
Joined
Jul 8, 2010
Messages
2,028
Location
Hardin County
Coldfusion":4pm13i9u said:
WG Taxidermist":4pm13i9u said:
You know with the proper adhesives you can glue pieces together and turn them. The adhesive matches the corian so you wouldn't see the glue line.

Sent from my SM-G925F using Tapatalk
I'm just learning about corian. What adhesive would be used for best results?

Sent from my SM-N920V using Tapatalk
You can Google it but I usually use Integra or Dupont adhesives.

Sent from my SM-G925F using Tapatalk
 

Coldfusion

Well-Known Member
Joined
Jan 20, 2016
Messages
703
WG Taxidermist":1drdhrn7 said:
Coldfusion":1drdhrn7 said:
WG Taxidermist":1drdhrn7 said:
You know with the proper adhesives you can glue pieces together and turn them. The adhesive matches the corian so you wouldn't see the glue line.

Sent from my SM-G925F using Tapatalk
I'm just learning about corian. What adhesive would be used for best results?

Sent from my SM-N920V using Tapatalk
You can Google it but I usually use Integra or Dupont adhesives.

Sent from my SM-G925F using Tapatalk
Pm sent

Sent from my SM-N920V using Tapatalk
 

WG Taxidermist

Well-Known Member
Joined
Jul 8, 2010
Messages
2,028
Location
Hardin County
Coldfusion":1hboapwd said:
WG Taxidermist":1hboapwd said:
Coldfusion":1hboapwd said:
WG Taxidermist said:
You know with the proper adhesives you can glue pieces together and turn them. The adhesive matches the corian so you wouldn't see the glue line.

Sent from my SM-G925F using Tapatalk
I'm just learning about corian. What adhesive would be used for best results?

Sent from my SM-N920V using Tapatalk
You can Google it but I usually use Integra or Dupont adhesives.

Sent from my SM-G925F using Tapatalk
Pm sent

Sent from my SM-N920V using Tapatalk
Text sent

Sent from my SM-G925F using Tapatalk
 

rdholder

Member
Joined
Mar 20, 2014
Messages
10
Location
Columbia TN
Hey, I am in Franklin and I have lots of solid surface (Corian, etc.) but just about all is 1/2 inch. The old Dupont Corian used to be 3/4 inch but you will have a hard time finding any that thick. I used to do warranty work for Dupont and other Solid Surface manufacturers for several years. Thanks.
 

Latest posts

Top