Choke tube

Jcalder

Well-Known Member
Joined
Sep 18, 2012
Messages
9,407
Location
Cookeville
I'm a bit late to the party but it's occurred to me that my choke tube is missing. So I'm in need of a new one. 20 gauge Remington 870. What do y'all like. I had a Carlson's I think .575 and it got unscrewed and fell out of my gun last fall. It wasn't bad, but my pattern coulda been tighter.
 

backyardtndeer

Well-Known Member
Joined
Jul 29, 2015
Messages
21,317
Location
West Tennessee
Just a cheap tru glo from Walmart. Patterns great with Remington nitro turkey loads. Oldest daughter killed a bird just shy of 40 yards with it.
 

Attachments

  • 16161822375177224733110491457482.jpg
    16161822375177224733110491457482.jpg
    2.3 MB · Views: 83

REN

Well-Known Member
Joined
Oct 24, 2007
Messages
9,337
Location
Wilson County, TN
I'm also using federal tss9 out of it if it matters

Carlosn, Turlock, Indian Creek, Kicks are all popular options especially for TSS loads. luckily all 20 gauge bores are the same basic diameter so its more universal on chokes vs 12 gauge. If you want a tighter pattern look in the 555-562 range.

Just a side note the construction doesn't always tell the whole story, the internals and design also play a huge role. Basically not all 555 chokes are the same.
 

Andy S.

Well-Known Member
Joined
Jul 26, 1999
Messages
23,684
Location
Atoka, TN
My buddy hunts with the Remington Super Full .572 and kills plenty with it and TSS #9s. He's never had a reason to try another choke.

 

Andy S.

Well-Known Member
Joined
Jul 26, 1999
Messages
23,684
Location
Atoka, TN
The most important thing to consider is that POA = POI with your pellets downrange. That is far more important than if one choke gives you 10-20 more pellets in the 10" or 20" circles at 40 yards. Over constriction that results in blown patterns (scattered TSS pellets immediately after exiting the choke) is another thing you want to avoid. Good luck with your decision.
 

TN Larry

Well-Known Member
Joined
Sep 17, 2003
Messages
7,601
Location
Baxter, Tennessee
I'm shooting a Carlson 575 out of my 870 20 gauge, but my son's gun shot the Primos Tightwad better. Both guns shoot around 250 in the 10" circle and 250 more in the 10-20" with hand rolled TSS #9.
 

Tenntrapper

Well-Known Member
Joined
Aug 29, 2016
Messages
9,291
If you are stuck on the carlson, cabelas does currently have them in stock in the .568 for remington, and they are on sale https://www.cabelas.com/shop/en/carlsons-long-beard-xr-turkey-choke-tube?bc_pid=MjE3OTU3Ng==&cm_soc=email&type=trigger|blue|WndShCU&bc_lcid=t5818531529326592lw6386366898995200, funny how I got an email on this just this morning and I was not looking for a turkey choke.
This choke says "not for steel shot". I would think this also applies to tss.
 

Andy S.

Well-Known Member
Joined
Jul 26, 1999
Messages
23,684
Location
Atoka, TN
^^ I wouldn't worry about "lead only" and "not for steel shot" wording, but I would be concerned that the choke above on sale for a few dollars off was designed for Longbeard shells that have shot-lock technology, basically a resin that keeps the lead pellet shot string intact to prevent fliers. Most TSS loaded ammo (likely all) does not utilize this resin. Food for thought.
 

Tenntrapper

Well-Known Member
Joined
Aug 29, 2016
Messages
9,291
^^ I wouldn't worry about "lead only" and "not for steel shot" wording, but I would be concerned that the choke above on sale for a few dollars off was designed for Longbeard shells that have shot-lock technology, basically a resin that keeps the lead pellet shot string intact to prevent fliers. Most TSS loaded ammo (likely all) does not utilize this resin. Food for thought.
Not being a smart azz, but what does this resin do? Or rather, what does this choke tube do, because of it. How would it affect other types of shells. Genuinely curious. Thanks
 

Latest posts

Top