Tndeer Logo

Page 1 of 1 1
Topic Options
#823087 - 07/15/08 07:26 PM Anyway to remove inserts?
Buckblaster
10 Point


Registered: 10/04/06
Posts: 3893
Loc: bradley county,TN/Lancaster,SC

Offline
???
_________________________

Turn your caps lock of goober, we can hear you.

Top
#823153 - 07/15/08 07:52 PM Re: Anyway to remove inserts? [Re: Buckblaster]
eddie c
Old School
12 Point


Registered: 08/09/01
Posts: 6262
Loc: jackson, tn

Offline
from what type of shaft?
here is how i remove from carbons. I heat up a field pt pretty hot then screw in the shaft, wait about a minute and twist. if it doesnt come out, I remove the nock and drop a drill bit inside the shaft and hammer it out by bouncing the bit up and down.
alum shafts I heat them up just enough to break the bond.

Top
#823389 - 07/15/08 10:19 PM Re: Anyway to remove inserts? [Re: eddie c]
Buckblaster
10 Point


Registered: 10/04/06
Posts: 3893
Loc: bradley county,TN/Lancaster,SC

Offline
Thanks, carbon shafts.
_________________________

Turn your caps lock of goober, we can hear you.

Top
#823493 - 07/15/08 11:36 PM Re: Anyway to remove inserts? [Re: Buckblaster]
Big J
16 Point


Registered: 03/10/06
Posts: 11990
Loc: Joelton

Offline
Put the field tip in then lighter it until hot. It will transfer the heat to the insert and you can twist the field tip with plyers like you are tightening it and the whole uinsert will turn then just remove
_________________________
Love God, Love people, Live Gospel!!

Top
#823667 - 07/16/08 06:54 AM Re: Anyway to remove inserts? [Re: Big J]
plinker22
16 Point


Registered: 02/07/05
Posts: 11905
Loc: Mountians of East Tennessee

Offline
I did not know this, very helpful info.
_________________________
[quote=UTGrad]Ha ha that's brilliant Plinker 22 [/quote]
Well said UTGrad. \:D

Top
#823970 - 07/16/08 10:16 AM Re: Anyway to remove inserts? [Re: Big J]
CZ284
8 Point


Registered: 10/30/06
Posts: 1198
Loc: Rossville, Tn

Offline
 Originally Posted By: Big J
Put the field tip in then lighter it until hot. It will transfer the heat to the insert and you can twist the field tip with plyers like you are tightening it and the whole uinsert will turn then just remove


I do the same thing and still use hot melt glue to put the inserts in my broadhead / hunting arrows. For tuning, heat the broadhead (I use our gas stove on low burner setting) just enough to soften the glue, then turn the head and spin test them. On my practice arrows for field points, I use CA glue.

Top
#824074 - 07/16/08 12:08 PM Re: Anyway to remove inserts? [Re: eddie c]
Buckblaster
10 Point


Registered: 10/04/06
Posts: 3893
Loc: bradley county,TN/Lancaster,SC

Offline
 Originally Posted By: eddie c
from what type of shaft?
here is how i remove from carbons. I heat up a field pt pretty hot then screw in the shaft, wait about a minute and twist. if it doesnt come out, I remove the nock and drop a drill bit inside the shaft and hammer it out by bouncing the bit up and down.
alum shafts I heat them up just enough to break the bond.


I used superglue so that heating up stuff didnt work.

U took the knock out and stuck a big drill bit upside down in my shaft and swung it with one hand like a baseball bat and the insert came flying out and the dril bit did too, right acros the room \:D
_________________________

Turn your caps lock of goober, we can hear you.

Top
#824231 - 07/16/08 02:27 PM Re: Anyway to remove inserts? [Re: Buckblaster]
eddie c
Old School
12 Point


Registered: 08/09/01
Posts: 6262
Loc: jackson, tn

Offline
 Originally Posted By: Buckblaster
 Originally Posted By: eddie c
from what type of shaft?
here is how i remove from carbons. I heat up a field pt pretty hot then screw in the shaft, wait about a minute and twist. if it doesnt come out, I remove the nock and drop a drill bit inside the shaft and hammer it out by bouncing the bit up and down.
alum shafts I heat them up just enough to break the bond.


I used superglue so that heating up stuff didnt work.

U took the knock out and stuck a big drill bit upside down in my shaft and swung it with one hand like a baseball bat and the insert came flying out and the dril bit did too, right acros the room \:D


Top
#824348 - 07/16/08 03:47 PM Re: Anyway to remove inserts? [Re: eddie c]
Hillbilly Hunter
Killbilly
16 Point


Registered: 07/15/05
Posts: 17818
Loc: Branchville

Offline
good info
_________________________
...they never call me by my name, just Hillbilly...


Top
#825600 - 07/17/08 11:07 AM Re: Anyway to remove inserts? [Re: Hillbilly Hunter]
Viper (tp)
14 Point


Registered: 12/23/04
Posts: 9426
Loc: greenfield, tenn.

Offline
I have wondered this myself good info fellas! ;\)
_________________________
HUNTERS FOR THE HUNGRY, IT WORKS HERE IN WEAKLEY COUNTY!!

Top
Page 1 of 1 1


Moderator:  RUGER, Tennessee Todd, Tennessee Todd, Bobby G, Unicam, CBU93, stretch, Cuttin Caller, Kimber45, Mrs.Unicam, Crappie Luck 
Hop to:
Top Posters
4105244
RUGER
86693
Deer Assassin
65048
BSK
60881
Crappie Luck
51376
spitndrum
Newest Members
TboneD, sbhockey, ZachA, DocT, Raegan
13202 Registered Users
Who's Online
83 registered (hunt4646, jakebird, buckslayerr, dsa5455, catman529, ZachMarkus, 7 invisible) and 111 anonymous users online.
Forum Stats
13202 Members
42 Forums
91467 Topics
1069284 Posts

Max Online: 788 @ 11/11/13 08:06 PM
Moon Phase
CURRENT MOON
August
Su M Tu W Th F Sa
1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
31
Forum Donations
The TnDeer.Com Deer Talk Forum is for Tennessee Deer Hunters by Tennessee Deer Hunters. If you enjoy using our Talk Forum and would like to contribute to help in it's up-keep. Just submit your contribution by clicking on the DONATE button below and paying with PayPal or a major credit card. Any amount is much appreciated. Thanks for your support!

TN Burn Safe

Generated in 0.044 seconds in which 0.001 seconds were spent on a total of 14 queries. Zlib compression enabled.