Tndeer Logo

Page 1 of 2 12>
Topic Options
#565562 - 01/15/08 07:20 PM I Wish
TiminTN
12 Point


Registered: 06/18/00
Posts: 6341
Loc: Memphis,Tennessee U.S.A.

Offline
I could do this......

http://accurateshooter.net/Blog/grizzlychambering.mov
_________________________
You cannot argue with STUPID

Top
#565935 - 01/16/08 12:45 AM Re: I Wish [Re: TiminTN]
BucknBass
TnDeer Old Timer
10 Point


Registered: 09/27/99
Posts: 2843
Loc: Bartlett, TN USA

Offline
No doubt! Maybe 50 of us could go in on one of those machines!
_________________________
NRA Life Member

Top
#566006 - 01/16/08 06:35 AM Re: I Wish [Re: BucknBass]
Whelen Man
TnDeer Old Timer
8 Point


Registered: 03/12/99
Posts: 2327
Loc: Athens, TN, USA

Offline
I bought a 4 hour video from Richard Franklin which details all the process of metalwork for precision rifles. I've been drooling ever since with thoughts of turning the boat and the space where it sets into the equipment. We'll see this year. Anyone need a good bass and crappie boat?

My brother who's now about 60 whose company just closed just started the millwrights course at the local vo-tech school here and will be learning just this for the next two years. Maybe he'll be able to give me some pointers.

My understanding is the tooling will cost about as much again as the machinery.
_________________________
Recipient of the Coveted Senior Discount!

Top
#566008 - 01/16/08 06:40 AM Re: I Wish [Re: Whelen Man]
TiminTN
12 Point


Registered: 06/18/00
Posts: 6341
Loc: Memphis,Tennessee U.S.A.

Offline
If I thought I could learn the skills, I`d turn my tractor and equipment for enough to make it happen. This is Gordy Gritters who made this DVD for Grizzly, mr. bigs brother Ronnie, has a rifle built by him that is supposed to rock. He has a very good reputation as a smith.

Richard Franklin, is a master, bonified, blue ribbon, master.

The Grizzly G0509G on their website is $6700.00 +
_________________________
You cannot argue with STUPID

Top
#566012 - 01/16/08 06:44 AM Re: I Wish [Re: TiminTN]
Whelen Man
TnDeer Old Timer
8 Point


Registered: 03/12/99
Posts: 2327
Loc: Athens, TN, USA

Offline
His videos are worth every penny and the man is a gem.
_________________________
Recipient of the Coveted Senior Discount!

Top
#566162 - 01/16/08 08:57 AM Re: I Wish [Re: Whelen Man]
Whelen Man
TnDeer Old Timer
8 Point


Registered: 03/12/99
Posts: 2327
Loc: Athens, TN, USA

Offline
I could use a lathe today. I've been trying to make a outside neck chamferer with an inside the neck mandrel the same size as my once fired cases inside diameter. It's just an idea I've been playing with to prevent damage to the case mouth when beveling the outside edge. I really don't have the precision to do what I want and need a small lathe to keep everything aligned including the threads for the tool to attach to my case trimmer. Just using the standard dies I have won't get the threads on straight enough for my purposes and I get too much wobble. Back to the drawing board.
_________________________
Recipient of the Coveted Senior Discount!

Top
#567274 - 01/16/08 09:02 PM Re: I Wish [Re: Whelen Man]
TiminTN
12 Point


Registered: 06/18/00
Posts: 6341
Loc: Memphis,Tennessee U.S.A.

Offline
Great news for me today. I have 2 blanks at my smith, but his point blank season is nearing so close I was sure worried about my projects. I called and told him of me joining the IBS and was going to St. Louis in March for my first 600 yd match, I smoothed it over to get 1 of my blanks chambered plus my blowout barrel for the Dasher. I been on a natural high all day...........Going to St Louis with a brand new barrel.
_________________________
You cannot argue with STUPID

Top
#567572 - 01/17/08 07:08 AM Re: I Wish [Re: TiminTN]
BucknBass
TnDeer Old Timer
10 Point


Registered: 09/27/99
Posts: 2843
Loc: Bartlett, TN USA

Offline
That sounds like a fun trip!
_________________________
NRA Life Member

Top
#567599 - 01/17/08 07:32 AM Re: I Wish [Re: BucknBass]
Whelen Man
TnDeer Old Timer
8 Point


Registered: 03/12/99
Posts: 2327
Loc: Athens, TN, USA

Offline
Congrats Tim. It's always nice to get new toys. Now you'll have some work to do before March. I just sent off my IBS membership yesterday. Odd you mentioned it. Oak Ridge doesn't start up until late April so I guess I'll have until then to get my new barrel broken in and loads worked up. I want to give the head plenty of time to get settled down and not take any backwards steps. I mowed the leaves last week and that was a mistake. I've paid for it ever since. I want to try the 108, and 115 Bergers sometime before then and I've got 107 Sierras in my first loads. I've already got some of the 108s and need to get a few of the 115s. Your loads in that 6 Dasher should be practically the same loads as for my BRX. There's almost no difference in case capacity. Varget, RL15, and H4895 seem to be some of the top choices. I was told to go with Varget, CCI450s, 105 Bergers and Lapua cases and just forget everything else. The guys saying this are hard to ignore.

The 600 yard nationals should be a hoot in June here at Oak Ridge. I doubt I'll be much for competition for the top shooters but maybe I can be some help by being a bucket carrier. Doesn't Bass Pro need to sponser a couple of representatives from Middle Tennessee and East Tennessee to shoot in this match as newcomers. Good luck!
_________________________
Recipient of the Coveted Senior Discount!

Top
#567640 - 01/17/08 08:04 AM Re: I Wish [Re: Whelen Man]
TiminTN
12 Point


Registered: 06/18/00
Posts: 6341
Loc: Memphis,Tennessee U.S.A.

Offline
This will be a learning experience for sure. I may be to overwhelmed for it to be fun, but I`ll try......the loads you have sound great, and I am going to add some Vhit powder to that short list, and Federal 205M`s, I have many JLK 105`s, CR 100`s, Spencer 103`s, Berger 105/108`s to play with, just need to pick out 2 bullets, 2 powders, and 2 primers to play with.
_________________________
You cannot argue with STUPID

Top
Page 1 of 2 12>


Moderator:  RUGER, Bobby G, Unicam, CBU93, stretch, TurkeyBurd, Kimber45, Mrs.Unicam, Crappie Luck, gtk 
Hop to:
Top Posters
4106599
RUGER
88400
Deer Assassin
65979
BSK
62020
Crappie Luck
51392
spitndrum
Newest Members
yarddawg54, schiesser, bigdoc, Bggamehunter, willy2763
13605 Registered Users
Who's Online
1 registered (JoshDosMil) and 40 anonymous users online.
Forum Stats
13605 Members
43 Forums
100233 Topics
1180120 Posts

Max Online: 788 @ 11/11/13 08:06 PM
Moon Phase
CURRENT MOON
December
Su M Tu W Th F Sa
1 2 3 4 5 6
7 8 9 10 11 12 13
14 15 16 17 18 19 20
21 22 23 24 25 26 27
28 29 30 31
Forum Donations
The TnDeer.Com Deer Talk Forum is for Tennessee Deer Hunters by Tennessee Deer Hunters. If you enjoy using our Talk Forum and would like to contribute to help in it's up-keep. Just submit your contribution by clicking on the DONATE button below and paying with PayPal or a major credit card. Any amount is much appreciated. Thanks for your support!

TN Burn Safe

Generated in 0.005 seconds in which 0.001 seconds were spent on a total of 15 queries. Zlib compression enabled.