Tndeer Logo

Page 1 of 1 1
Topic Options
#489414 - 11/11/07 07:38 PM Cleaning the ML w/ scope
Rusty Nail
Spike


Registered: 09/17/06
Posts: 54
Loc: Dickson, TN

Offline
I've been using (and loving) the ML for only a few years. Part of my cleaning the gun (after shooting) has been taking apart the gun and dunking the barrel in the hottest water I can get. In the past I've taken the scope off before dunking the barrel. Seemed stange that I take the time and effort to sight in the gun (down to the smallest adjustment), only to take off the sight during the cleaning. Even with pre-set scope mounts, I've always thought I might be putting the scope back on the barrel in just a slightly different position. Even tho it looks like it mounts back on correctly, I may be off just a hair - which of course - changes the shooting accuracy. I mentioned that concern to a buddy and he said he doesn't take off the scope even when cleaning. He had the same concern about changing the accuracy and thought that the scope was water proof and should tolerate the exposure to water.

I tryed that. It's a good quality scope, and should tolerate getting rained on, but was nervous about sticking it under water for a soaking. Sure enough, the next day the scope fogged up on the inside. That foggy haze seemed to (finally) go away. I shot a doe with it later the next day, so I know it's shooting well. The next time I cleaned it, I was careful not to remove the scope, but kept that end of the barrel out of the water. Still managed to get plenty of water thru the barrel (with the brushes and patches). Seemed to work OK.

I was afraid I'd ruined the scope. What do you all do for cleaning? Same technique? I'm sort of self taught and advice would be welcome.

Thanks
_________________________
"We're burning daylight"

Top
#489497 - 11/11/07 08:11 PM Re: Cleaning the ML w/ scope [Re: Rusty Nail]
Trapper John
TnDeer Old Timer
16 Point


Registered: 03/13/99
Posts: 11747
Loc: La Vergne,TN/Decaturville, TN

Offline
Depends on the rifle.

With mine you can remove the breech plug entirely. I only stick the end of the barrel in a bowl of HOT water and suck some water up during the cleaning process by running a cleaning rod and patch up and down the bore from the breech end. That keeps everything else entirely dry.

Top
#489704 - 11/11/07 10:01 PM Re: Cleaning the ML w/ scope [Re: Trapper John]
Southpaw
12 Point


Registered: 09/03/00
Posts: 5887
Loc: Drummonds, Tn

content Online
Ditto! \:\)
_________________________
My parents spanked me as a child... I now suffer from a psychological condition known as "respect for others"

Top
#489881 - 11/12/07 07:53 AM Re: Cleaning the ML w/ scope [Re: Southpaw]
iowavf
10 Point


Registered: 10/25/05
Posts: 3077
Loc: southwest iowa

Offline
Same here, but instead of a patch I use the cotton attachment you can buy.
Top
#490109 - 11/12/07 11:06 AM Re: Cleaning the ML w/ scope [Re: iowavf]
smokepolehall
8 Point


Registered: 12/04/04
Posts: 1135
Loc: Land of Rocks, Mo.

Offline
A mop,i stick the muzzle end of barrel in basin of hot water until it comes clean. Then dry it and oil it good, have a 4x on it.
_________________________
Miss Vixen Terror of all Tick Toters
Marie Laveau 2nd Matrix 355
Dark Lady E'cet 165
Banshee MXB320
vixenmaster Flemish Strings!

Top
#490586 - 11/12/07 06:27 PM Re: Cleaning the ML w/ scope [Re: smokepolehall]
jakeway
TnDeer Old Timer
10 Point


Registered: 11/22/99
Posts: 3577
Loc: Hendersonville, TN, USA

Offline
I used the bucket of hot water method with my percussion, which had no scope. I now use a CV Optima with a 2-7X32 scope on it, and there's no way I'd ever intentionally put that scope under water!

I use 777, and they say you don't even need hot soapy water; patches with drinking-temp water are fine, so that's what I use. Only takes about 3 wet parches and 5 dry ones to make 'em spotless clean & dry. Remove breech plug, soak in breech plug cleaner a minute or so, then rub it off, greese it up, and replace it.

Oh, I also keep lense covers on the scope to keep any stray waer and dirt from getting on the lense.
_________________________
It's not rocket surgery, for crying outside!

Top
#490963 - 11/12/07 09:11 PM Re: Cleaning the ML w/ scope [Re: jakeway]
holstonangler
6 Point


Registered: 02/25/06
Posts: 937
Loc: Johnson City

Offline
ditto on the 777, its not nessary to soak the barrel in hot water when cleaning. Just soak some patches in water and/or some barrel cleaner and follow up with a bit of oil along with a dry patch until patch comes out looking clean.
Top
Page 1 of 1 1


Moderator:  RUGER, Tennessee Todd, Bobby G, Unicam, CBU93, stretch, Kimber45, Mrs.Unicam, Crappie Luck 
Hop to:
Top Posters
4104855
RUGER
86156
Deer Assassin
64740
BSK
60382
Crappie Luck
51368
spitndrum
Newest Members
THEdonkey0515, muddyhunter, davey1230, MisquitoNet, strutter rutter
13079 Registered Users
Who's Online
58 registered (greygoose, feldmutze, Grill-n-man, tn/kyhunter, THEdonkey0515, z7x, 5 invisible) and 107 anonymous users online.
Forum Stats
13079 Members
42 Forums
88154 Topics
1032740 Posts

Max Online: 788 @ 11/11/13 08:06 PM
Moon Phase
CURRENT MOON
July
Su M Tu W Th F Sa
1 2 3 4 5
6 7 8 9 10 11 12
13 14 15 16 17 18 19
20 21 22 23 24 25 26
27 28 29 30 31
Forum Donations
The TnDeer.Com Deer Talk Forum is for Tennessee Deer Hunters by Tennessee Deer Hunters. If you enjoy using our Talk Forum and would like to contribute to help in it's up-keep. Just submit your contribution by clicking on the DONATE button below and paying with PayPal or a major credit card. Any amount is much appreciated. Thanks for your support!

TN Burn Safe

Generated in 0.229 seconds in which 0 seconds were spent on a total of 14 queries. Zlib compression enabled.