Tndeer Logo

Page 1 of 1 1
Topic Options
#3717340 - 07/24/14 11:17 AM Fletching question
Redwing
10 Point


Registered: 11/15/04
Posts: 2650
Loc: Blount Co.

Offline
Just bought a new bow, was going to use my arrows but the fletching interferes with the Whisker Biscuit. Obviously I have to refletch with the newer shorter vanes. Are there any negatives with the short? I would think the longer vanes with more surface would guide the arrow better.
Top
#3717374 - 07/24/14 11:48 AM Re: Fletching question [Re: Redwing]
catman529
spiderboy
16 Point


Registered: 11/10/10
Posts: 17592
Loc: Franklin TN

Offline
I didn't know vanes would interfere with the biscuit, just make sure one vane is pointing straight up so that none of them hit the bottom of the biscuit
_________________________
>>>------------------>

Top
#3717452 - 07/24/14 01:02 PM Re: Fletching question [Re: catman529]
bowhunter163
10 Point


Registered: 09/24/07
Posts: 2678
Loc: knoxville,tn

Offline
Are you talking about the vanes being too long and already being in the biscuit at rest ? If so that's not really an issue and will still shoot ok .
_________________________
For all your archery needs
Sportsmans choice pro shop
Knoxville, TN
865-922-5456

Top
#3717486 - 07/24/14 01:33 PM Re: Fletching question [Re: bowhunter163]
TN Whitetail Freak
8 Point


Registered: 11/29/09
Posts: 1942
Loc: Bradford, TN (Gibson Co.)

Offline
Get an apache drop away rest they are simple and good rest
_________________________
Crossbows should be for the handicap only!

Life's Not Handed To Ya; Go Get It.

Sure, the rut is a GREAT time to hunt if you don't know what you're doing!

Top
#3717503 - 07/24/14 01:55 PM Re: Fletching question [Re: TN Whitetail Freak]
stik
"Popcorn"
18 Point


Registered: 03/12/99
Posts: 21393
Loc: lenoir city,tn

Offline
ditch the biscuit
_________________________



Top
#3717561 - 07/24/14 03:00 PM Re: Fletching question [Re: stik]
UTGrad
16 Point


Registered: 12/01/07
Posts: 10229
Loc: Franklin, TN

Offline
The whisker biscuit is an EXCELLENT rest. If I wasn't shooting my Limbdriver I would shoot a biscuit.
Top
#3717612 - 07/24/14 03:45 PM Re: Fletching question [Re: UTGrad]
Grill-n-man
4 Point


Registered: 01/10/13
Posts: 424
Loc: rhea county tn

Offline
The short 2 inch vanes will work just fine. On the whisker biscuit, just as in almost all capture rest, if your vanes are helical and even with a slight offset you will have problems. Capture rest perform best with straight fletchings. Also with the biscuits remember to have the cock feather up, the black bristles are stiffer to support the weight of the arrow so if your fletchings contact them the passthru will not be smooth. And the Whisker Biscuit rest is like the cockroach, it will still be around long after the others have died off.
Top
#3722193 - 07/31/14 12:17 PM Re: Fletching question [Re: Grill-n-man]
Legnip
4 Point


Registered: 03/14/12
Posts: 174
Loc: Brentwood, TN

Offline
How far do you want to shoot?
- Straight vanes will have the widest group.
- Offset will tighten it up a little.
- Helical will give you the tightest group.
There was a recent article in one of the magazines with machine shot arrows and grouping. Grill-n-man's right. Biscuit's are durable and reliable, but the vanes need to pass through it. More angle = more resistance, speed loss, & re-fletching required. All that said, it shouldn't be a problem for 20-30 yard shots. The drop away rests are better since the arrow isn't in contact the entire time. I have a QAD drop away and like it. 2"-3" groups at 45 yds.

Top
#3722415 - 07/31/14 04:29 PM Re: Fletching question [Re: Legnip]
TNDeerGuy
12 Point


Registered: 11/28/06
Posts: 6170
Loc: Old Hickory/Mt.Juliet, TN

Offline
This has been looked at several times by people that have the equipment and time to look at it as scientific as can be done, and every report is basically the same....there is not a marked difference in flight of a 4" vane compared to a short vane like a Blazer.

One more thing, the main difference between a helical and an offset is the noise—the average archer, at average distances, will not notice a significant difference in groupings.

Top
#3722903 - 08/01/14 08:32 AM Re: Fletching question [Re: TNDeerGuy]
Legnip
4 Point


Registered: 03/14/12
Posts: 174
Loc: Brentwood, TN

Offline
The article was from Petersen's Bowhunting. The 45 yd comparison used a machine and fixed blade broadheads. The grouping was
- Straight 3.75"
- 2 degree offset 2.375"
- Helical 1"
obviously the 20 yard group was smaller.

Top
Page 1 of 1 1


Moderator:  RUGER, Tennessee Todd, Tennessee Todd, Bobby G, Unicam, CBU93, stretch, Cuttin Caller, Kimber45, Mrs.Unicam, Crappie Luck, gtk 
Hop to:
Top Posters
4106599
RUGER
88400
Deer Assassin
65979
BSK
62020
Crappie Luck
51392
spitndrum
Newest Members
yarddawg54, schiesser, bigdoc, Bggamehunter, willy2763
13605 Registered Users
Who's Online
3 registered (delta, dgb7mm, Teacher) and 72 anonymous users online.
Forum Stats
13605 Members
43 Forums
100233 Topics
1180122 Posts

Max Online: 788 @ 11/11/13 08:06 PM
Moon Phase
CURRENT MOON
December
Su M Tu W Th F Sa
1 2 3 4 5 6
7 8 9 10 11 12 13
14 15 16 17 18 19 20
21 22 23 24 25 26 27
28 29 30 31
Forum Donations
The TnDeer.Com Deer Talk Forum is for Tennessee Deer Hunters by Tennessee Deer Hunters. If you enjoy using our Talk Forum and would like to contribute to help in it's up-keep. Just submit your contribution by clicking on the DONATE button below and paying with PayPal or a major credit card. Any amount is much appreciated. Thanks for your support!

TN Burn Safe

Generated in 0.008 seconds in which 0.002 seconds were spent on a total of 14 queries. Zlib compression enabled.