Tndeer Logo

Page 1 of 1 1
Topic Options
#3685143 - 06/06/14 04:27 PM Comparator help
Jcalder
6 Point


Registered: 09/18/12
Posts: 964
Loc: Tennesse

Offline
Got my comparator in today and measured some rounds. They were all within .004 of each other. Went to a different bullet than my previous rounds and they were roughly .040 shorter than the first ones I measured. Is this correct? I know it's measuring the ogive and I was sure I seated them all just off the lands. Just wondering if each bullet measures different or if they should all be close
Top
#3685334 - 06/06/14 11:58 PM Re: Comparator help [Re: Jcalder]
Rubberduck270
10 Point


Registered: 11/01/10
Posts: 2694
Loc: Lawrence Co.

content Online
They were both off the lands of the same rifle?

If you set them both up to be .010" off the lands of the same rifle they should measure the same from base to ojive. If you set them up to be the same OAL then one would be longer than the other since the bullet shape is different from each other.
_________________________
Smokeless Muzzleloading: It ain't your Grampa's flintlock

Top
#3685411 - 06/07/14 08:15 AM Re: Comparator help [Re: Rubberduck270]
Jcalder
6 Point


Registered: 09/18/12
Posts: 964
Loc: Tennesse

Offline
Ok. I think I told you wrong in my op. I was measuring a 165 sgk spitzer. My measurement on one box that was loaded was 2.262-2.265 using the comparator. I checked another box loaded with the bullet and it measured 2.250 or so. I checked oal and they were all with .008 of each other. So I think they were probably loaded from different lots. The other bullet I checked was a 165 swift scirocco. It measured around 2.224. Should this seam correct to you
Top
#3685430 - 06/07/14 09:29 AM Re: Comparator help [Re: Jcalder]
Rubberduck270
10 Point


Registered: 11/01/10
Posts: 2694
Loc: Lawrence Co.

content Online
Sounds about right. The comparator isn't the same diameter as your barrel's lands and the bullets are shaped differently so they will engage the comparator at different lengths since they were set up using your rifle.
_________________________
Smokeless Muzzleloading: It ain't your Grampa's flintlock

Top
#3685481 - 06/07/14 12:02 PM Re: Comparator help [Re: Rubberduck270]
Jcalder
6 Point


Registered: 09/18/12
Posts: 964
Loc: Tennesse

Offline
Thanks. My thinking wasn't correct and I wanted to make sure. I took the bullets I loaded for got the depth set and recorded the measurements for each one
Top
Page 1 of 1 1


Moderator:  RUGER, gtk, Bobby G, Unicam, CBU93, stretch, TurkeyBurd, Kimber45, Mrs.Unicam, Crappie Luck 
Hop to:
Top Posters
4104864
RUGER
86263
Deer Assassin
64800
BSK
60460
Crappie Luck
51375
spitndrum
Newest Members
two1980, Darrenduhl, 2winsrus, jacmac, Smokeymtnbow
13101 Registered Users
Who's Online
78 registered (ranafea, REN, scn, ADR, SAWDUST, Mudbone, 11 invisible) and 108 anonymous users online.
Forum Stats
13101 Members
42 Forums
88762 Topics
1038484 Posts

Max Online: 788 @ 11/11/13 08:06 PM
Moon Phase
CURRENT MOON
July
Su M Tu W Th F Sa
1 2 3 4 5
6 7 8 9 10 11 12
13 14 15 16 17 18 19
20 21 22 23 24 25 26
27 28 29 30 31
Forum Donations
The TnDeer.Com Deer Talk Forum is for Tennessee Deer Hunters by Tennessee Deer Hunters. If you enjoy using our Talk Forum and would like to contribute to help in it's up-keep. Just submit your contribution by clicking on the DONATE button below and paying with PayPal or a major credit card. Any amount is much appreciated. Thanks for your support!

TN Burn Safe

Generated in 0.226 seconds in which 0.01 seconds were spent on a total of 14 queries. Zlib compression enabled.