Tndeer Logo

Page 1 of 1 1
Topic Options
#363139 - 08/24/07 11:12 AM Refinishing a synthetic stock
PMC, certified
14 Point


Registered: 11/11/02
Posts: 8741
Loc: Nashville, TN

Offline
Ok, I’ve just refinished my sons stock and thought I would share the process. First let me say, prep work is everything. I have done paint and bodywork before so I prepared for a long process.

I started by acquiring a stock a couple of years back. It is a Remington Ti takeoff. It had previously been bedded and had a 1” pad on it. I cut off the pad to get to a shorter LOP for youth length.



Next I installed a secret special pad. It is cut from a .99 cent flip flop. I superglued it in place and the ground it down to close to final dimensions. The project then sat for a few months waiting.

After a couple of months I was ready to bed my action. It took a few hours with a dremel to remove the old bedding. I bedded the action and 1.5” in front of the lug with devcon steel bed. It turned out ok, a couple of voids but nothing too bad. With the action completed I turned to the barrel. The previous owner had opened up the barrel channel. I wrapped the barrel in 7 layers of clean release masking tape (blue) for a thickness of .035” free float.




With the bedding complete, I turned to the exterior. Ti stocks come with a black pimply finish. I started sanding with 150 grit and a sanding block. A few imperfections were fixed by making up small batches of bondo. When the bondo dries you sand it back down. After the 150 grit comes 220 and the 320. When the stock is close I sprayed the first primer coat. I used gray. This really shows the imperfections. A little body putty (kind of like premixed bondo in a toothpaste tube) and some more sanding with 600 grit then 800, 1200 and 1500 wet sanding.




When I was comfortable with the finish I sprayed my base coat. For my color choices I went with a White base coat. The base coat was allowed to dry for a day.



To get the color of Orange I wanted I ordered 4 oz of Red and 4 oz of Yellow. I mixed them until I got the shade of Orange I liked and then sprayed the stock, leaving the tip White.



I next let the Orange dry a day before laying out my pattern of flames. I used 1/8” and 1/16” art layout tape and freehanded the flames. When I was comfortable with the basic layout I masked inside the flames and the tip.





To get the main body color (Navy Blue) I mixed Matte black with Royal Blue. I wasn’t happy with a couple of little things so I reworked the flames slightly and re-sprayed the blue.






After letting that set up a day I clear coated it in Gloss. I am pretty pleased with the results.

Pmc

_________________________
War Eagle

Beating Back Ignorance Since 2002

Top
#363284 - 08/24/07 12:30 PM Re: Refinishing a synthetic stock [Re: PMC, certified]
statelineRUT
10 Point


Registered: 12/07/02
Posts: 3254
Loc: Michie, TN

Offline
Good work and great instructions.
_________________________
For it is the God who commanded light to shine out of darkness, who has shone in our hearts to give the light of the knowledge of the glory of God in the face of Jesus Christ. 2 Corinthians 4:6

Top
#363558 - 08/24/07 03:18 PM Re: Refinishing a synthetic stock [Re: statelineRUT]
Happy Birthday Hillbilly Hunter
Killbilly
16 Point


Registered: 07/15/05
Posts: 17822
Loc: Branchville

content Online
Looks good, but I think you have watched to much Star Trek. \:\)
_________________________
...they never call me by my name, just Hillbilly...


Top
#364483 - 08/25/07 12:54 AM Re: Refinishing a synthetic stock [Re: Hillbilly Hunter]
population control
10 Point


Registered: 09/18/06
Posts: 4901
Loc: down in the bottoms of t- coun...

Offline
thats cool ,for a kids gun.
_________________________
its about that time

Top
#364976 - 08/25/07 04:51 PM Re: Refinishing a synthetic stock [Re: population control]
Gravey
16 Point


Registered: 07/20/05
Posts: 19027
Loc: Rutherford / Wilson County Lin...

Offline
Nice job Pat. That looks like the Titans logo.
_________________________
If it ain't broke, don't fix it.

Top
Page 1 of 1 1


Moderator:  RUGER, gtk, Bobby G, Unicam, CBU93, stretch, TurkeyBurd, Kimber45, Mrs.Unicam, Crappie Luck 
Hop to:
Top Posters
4105246
RUGER
86700
Deer Assassin
65056
BSK
60881
Crappie Luck
51376
spitndrum
Newest Members
TboneD, sbhockey, ZachA, DocT, Raegan
13202 Registered Users
Who's Online
92 registered (beachguy, Pic IN the Casa, mjac, THEdonkey0515, paincave_2000, Tims, 11 invisible) and 125 anonymous users online.
Forum Stats
13202 Members
42 Forums
91496 Topics
1069661 Posts

Max Online: 788 @ 11/11/13 08:06 PM
Moon Phase
CURRENT MOON
August
Su M Tu W Th F Sa
1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
31
Forum Donations
The TnDeer.Com Deer Talk Forum is for Tennessee Deer Hunters by Tennessee Deer Hunters. If you enjoy using our Talk Forum and would like to contribute to help in it's up-keep. Just submit your contribution by clicking on the DONATE button below and paying with PayPal or a major credit card. Any amount is much appreciated. Thanks for your support!

TN Burn Safe

Generated in 0.041 seconds in which 0.001 seconds were spent on a total of 14 queries. Zlib compression enabled.