Tndeer Logo

Page 5 of 7 « First<34567>
Topic Options
#3576656 - 02/05/14 04:18 PM Re: Team Run 'N Gunners [Re: timberjack86]
catman529
spiderboy
16 Point


Registered: 11/10/10
Posts: 17592
Loc: Franklin TN

Offline
 Originally Posted By: timberjack86
 Originally Posted By: catman529
I wish I had a lathe to do so.
I got the pots from a friend. I am thinking about buying a lathe myself.
how much does a whole setup typically set you back?
_________________________
>>>------------------>

Top
#3576896 - 02/05/14 07:18 PM Re: Team Run 'N Gunners [Re: catman529]
timberjack86
14 Point


Registered: 06/20/11
Posts: 8269
Loc: Grundy county

Offline
 Originally Posted By: catman529
 Originally Posted By: timberjack86
 Originally Posted By: catman529
I wish I had a lathe to do so.
I got the pots from a friend. I am thinking about buying a lathe myself.
how much does a whole setup typically set you back?
I don't know the exact $$$ but I know its a lot for a good one. I read on oldgobbler a lot of guys use one from harbor freight and its around $130.
_________________________
Team Run 'N Gunners

Top
#3576909 - 02/05/14 07:23 PM Re: Team Run 'N Gunners [Re: timberjack86]
catman529
spiderboy
16 Point


Registered: 11/10/10
Posts: 17592
Loc: Franklin TN

Offline
 Originally Posted By: timberjack86
 Originally Posted By: catman529
 Originally Posted By: timberjack86
 Originally Posted By: catman529
I wish I had a lathe to do so.
I got the pots from a friend. I am thinking about buying a lathe myself.
how much does a whole setup typically set you back?
I don't know the exact $$$ but I know its a lot for a good one. I read on oldgobbler a lot of guys use one from harbor freight and its around $130.
$130 sounds cheap, but does that include the tools needed?
_________________________
>>>------------------>

Top
#3576921 - 02/05/14 07:28 PM Re: Team Run 'N Gunners [Re: catman529]
timberjack86
14 Point


Registered: 06/20/11
Posts: 8269
Loc: Grundy county

Offline
I don't think so. But still sounds like a deal to me. If I ever get back to work I would like to have a lathe. This weather sucks for logging.
_________________________
Team Run 'N Gunners

Top
#3577386 - 02/06/14 09:05 AM Re: Team Run 'N Gunners [Re: timberjack86]
Grizzly Johnson Moderator
Team Grizzly
16 Point


Registered: 10/07/08
Posts: 15791
Loc: Tennessee

Offline
I know this is your guys' thread.... but believe it or not, ole REN turns some stuff.... he could probably give you some info too.

$130 sounds cheap.... and not for the tooling needed either. Sure you might can buy a cheap one to play with but if you were going to get serious, it will cost you.... I'd for sure expect to spend $1,500-$2,500 on a decent set-up.

You will have to have a wood source and a wood stabilizing source.
_________________________
But if thou do that which is evil, be afraid; for he beareth not the sword in vain: for he is the minister of God, a revenger to execute wrath upon him that doeth evil.

Top
#3577855 - 02/06/14 03:01 PM Re: Team Run 'N Gunners [Re: Grizzly Johnson]
timberjack86
14 Point


Registered: 06/20/11
Posts: 8269
Loc: Grundy county

Offline
 Originally Posted By: Grizzly Johnson
I know this is your guys' thread.... but believe it or not, ole REN turns some stuff.... he could probably give you some info too.

$130 sounds cheap.... and not for the tooling needed either. Sure you might can buy a cheap one to play with but if you were going to get serious, it will cost you.... I'd for sure expect to spend $1,500-$2,500 on a decent set-up.

You will have to have a wood source and a wood stabilizing source.
I knew the good ones would cost some $$$$. The guys on oldgobbler spoke highly of the cheap harbor freight lathe.
_________________________
Team Run 'N Gunners

Top
#3579057 - 02/07/14 02:50 PM Re: Team Run 'N Gunners [Re: Main Beam]
mattwhit166
4 Point


Registered: 05/02/12
Posts: 231
Loc: NW Tennessee

Offline
 Originally Posted By: Main Beam
Both public and private, Gibson, Crockett, Carrol, Weakley, Madison,and Obion counties.


Hey MB, not to highjack you guys thread, but where are you located? I'm in Kenton, hunt some private land and public land in the area. Do most of my hunting in Franklin, TN. I was just curious as to where you were, cause we look to be pretty close!
_________________________
Brick by Brick

Top
#3579515 - 02/07/14 09:01 PM Re: Team Run 'N Gunners [Re: mattwhit166]
Main Beam
4 Point


Registered: 10/20/07
Posts: 289
Loc: Gibson Co

Offline
Gibson County , Medina! You have some really good hunting just to the south of you!
_________________________
Team Run 'N Gunners

Top
#3580978 - 02/09/14 09:01 AM Re: Team Run 'N Gunners [Re: Main Beam]
mattwhit166
4 Point


Registered: 05/02/12
Posts: 231
Loc: NW Tennessee

Offline
 Originally Posted By: Main Beam
Gibson County , Medina! You have some really good hunting just to the south of you!


Oh yeah! There's a big public bottom just south of me that normal produces some good birds every year.
_________________________
Brick by Brick

Top
#3581186 - 02/09/14 12:37 PM Re: Team Run 'N Gunners [Re: mattwhit166]
Main Beam
4 Point


Registered: 10/20/07
Posts: 289
Loc: Gibson Co

Offline
I hunt that some maybe we can meet for a hunt or 2, breakfast on me!
_________________________
Team Run 'N Gunners

Top
Page 5 of 7 « First<34567>


Moderator:  Mrs.Unicam, Grizzly Johnson, gtk 
Hop to:
Top Posters
4106599
RUGER
88400
Deer Assassin
65979
BSK
62020
Crappie Luck
51392
spitndrum
Newest Members
yarddawg54, schiesser, bigdoc, Bggamehunter, willy2763
13605 Registered Users
Who's Online
2 registered (rem270, excalhunter) and 54 anonymous users online.
Forum Stats
13605 Members
43 Forums
100233 Topics
1180122 Posts

Max Online: 788 @ 11/11/13 08:06 PM
Moon Phase
CURRENT MOON
December
Su M Tu W Th F Sa
1 2 3 4 5 6
7 8 9 10 11 12 13
14 15 16 17 18 19 20
21 22 23 24 25 26 27
28 29 30 31
Forum Donations
The TnDeer.Com Deer Talk Forum is for Tennessee Deer Hunters by Tennessee Deer Hunters. If you enjoy using our Talk Forum and would like to contribute to help in it's up-keep. Just submit your contribution by clicking on the DONATE button below and paying with PayPal or a major credit card. Any amount is much appreciated. Thanks for your support!

TN Burn Safe

Generated in 0.006 seconds in which 0.001 seconds were spent on a total of 14 queries. Zlib compression enabled.