Tndeer Logo

Page 2 of 2 <12
Topic Options
#3542266 - 01/11/14 05:16 PM Re: I took the DIY plunge [Re: UTGrad]
Vermin93
12 Point


Registered: 12/11/10
Posts: 5738
Loc: Dallas, TX & Signal Mtn, TN

Offline
 Originally Posted By: UTGrad
That's why I'm reluctant. If I had a backup bow to learn how to use the press that would be perfect. I'm not sure if I want to be learning on my only bow and screw something up real bad.

Trust me if it was raining vagina I'd have a pecker fall on my head. I don't have very good luck.


My first attempt will be on a new "backup" bow. I actually bought the same bow that I already have. I got a great deal on it since it's a 2012. I like it a lot and figured it would be good to have two of the same setups.
_________________________
“The more I read and the more I listen, the more apparent it is that our society suffers from an alarming degree of public ignorance” - Retired Supreme Court Justice Sandra Day O’Connor

Top
#3542449 - 01/11/14 07:40 PM Re: I took the DIY plunge [Re: Vermin93]
DixieCrafter
4 Point


Registered: 10/03/12
Posts: 330
Loc: Mid-TN

Offline
 Originally Posted By: Vermin93
 Originally Posted By: UTGrad
That's why I'm reluctant. If I had a backup bow to learn how to use the press that would be perfect. I'm not sure if I want to be learning on my only bow and screw something up real bad.

Trust me if it was raining vagina I'd have a pecker fall on my head. I don't have very good luck.


My first attempt will be on a new "backup" bow. I actually bought the same bow that I already have. I got a great deal on it since it's a 2012. I like it a lot and figured it would be good to have two of the same setups.


Dive right in on your on gear, just be careful working on gear for others! Pecker heads should be extra careful!!!
_________________________
If it goes BANG or Twang I'm into it! Fishing is something I do while waiting to go hunting! Predator by design, Southern by the Grace of God!

Top
#3542567 - 01/11/14 09:04 PM Re: I took the DIY plunge [Re: DixieCrafter]
UTGrad
14 Point


Registered: 12/01/07
Posts: 9433
Loc: Franklin, TN

Offline
Lol
Top
#3542796 - 01/12/14 07:06 AM Re: I took the DIY plunge [Re: bowhunter163]
Crow Terminator
TnDeer Old Timer
14 Point


Registered: 10/23/99
Posts: 8952
Loc: McMinn County

Offline
Just remember that every twist and untwist you put in the cables/string is going to have an effect on everything else on the bow. So don't be like the village idiot (me) and try to do everything at once. When I first got my press I measured the bow A-A and brace height and noticed it needed some tweaking to get in spec. So I pull up the online tuning guides and go at it. Yep I need to take out some twists of the cable....and need to add some over here to this. And there I went. Then I would take it out of the press, measure again...and uh oh..now I have the brace height right, but the bow is now pulling 78 lbs and it's just suppose to have 60 pound limbs on it. Hmmm....

And thus was my story with the press. Everything you do will change something else somewhere. Better to do one or two twists/untwists at a time, then check and see where you are. You might not blow the bow apart but you may not get it so far out of whack via tune that you'll wonder why you even got a press to start with.

That's exactly why I sold mine. I loved it for being able to do simple things like module changes, peep sight installation, reserving, etc. But the tuning part of it was still over my head; often times I would start out trying to do a little tweak and end up getting the bow so far gone that I could never get it back where I had it. Then I'd end up driving to the local shop and have the bow tech work on it. It really helps too that he has a draw board accessory...in which I did not, and didn't have the space to build one either. On the binary cam bows, if you don't have a draw board you are wasting your time, and or gonna make things a lot harder on yourself than what it could be.

Top
#3543108 - 01/12/14 12:45 PM Re: I took the DIY plunge [Re: Crow Terminator]
Vermin93
12 Point


Registered: 12/11/10
Posts: 5738
Loc: Dallas, TX & Signal Mtn, TN

Offline
My bows are binary cams and I was planning to build a draw board. Some other guys told me the same thing when I told them what bows I had. They said build a draw board or don't get a press.
_________________________
“The more I read and the more I listen, the more apparent it is that our society suffers from an alarming degree of public ignorance” - Retired Supreme Court Justice Sandra Day O’Connor

Top
#3545312 - 01/13/14 07:08 PM Re: I took the DIY plunge [Re: Vermin93]
Pinwheeled
4 Point


Registered: 09/19/11
Posts: 126
Loc: Nashville, TN

Offline
 Originally Posted By: Vermin93
My bows are binary cams and I was planning to build a draw board. Some other guys told me the same thing when I told them what bows I had. They said build a draw board or don't get a press.


With a binary, both are pretty dang important. A draw board is super cheap to build though. I think I have about $35 in mine.

Top
Page 2 of 2 <12


Moderator:  RUGER, Tennessee Todd, Tennessee Todd, Bobby G, Unicam, CBU93, stretch, Cuttin Caller, Kimber45, Mrs.Unicam, Crappie Luck 
Hop to:
Top Posters
4105500
RUGER
86958
Deer Assassin
65381
BSK
60988
Crappie Luck
51376
spitndrum
Newest Members
camohunter3, mtd, Higdon23, blcmrr2008, Urban deer Hunter
13270 Registered Users
Who's Online
100 registered (shooter_5_0, biglefty20, Coon_huntr4life, RodBone75, BuckDropper, PinchPoint, 11 invisible) and 129 anonymous users online.
Forum Stats
13270 Members
42 Forums
93022 Topics
1086989 Posts

Max Online: 788 @ 11/11/13 08:06 PM
Moon Phase
CURRENT MOON
September
Su M Tu W Th F Sa
1 2 3 4 5 6
7 8 9 10 11 12 13
14 15 16 17 18 19 20
21 22 23 24 25 26 27
28 29 30
Forum Donations
The TnDeer.Com Deer Talk Forum is for Tennessee Deer Hunters by Tennessee Deer Hunters. If you enjoy using our Talk Forum and would like to contribute to help in it's up-keep. Just submit your contribution by clicking on the DONATE button below and paying with PayPal or a major credit card. Any amount is much appreciated. Thanks for your support!

TN Burn Safe

Generated in 0.118 seconds in which 0.001 seconds were spent on a total of 14 queries. Zlib compression enabled.