Tndeer Logo

Page 1 of 1 1
Topic Options
#3218708 - 04/10/13 03:41 PM cleaning brass with ceramic media
Chaneylake
Brownsville Mafia
16 Point


Registered: 12/18/07
Posts: 16576
Loc: on the wings of a snow white d...

Offline
blackpowder shooters expect to have real clean brass inside and out. using ceramic media does this for us, notice how the primer pocket is cleaned also, this brass in straight from the tumbler






_________________________
"Don't piss down my back and tell me its rain", Fletcher, Outlaw Josey Wales

Living somewhere between this world and the other, Legends of the Fall

Top
#3218785 - 04/10/13 05:53 PM Re: cleaning brass with ceramic media [Re: Chaneylake]
DaveB
10 Point


Registered: 09/03/08
Posts: 4023
Loc: Shelby County

Offline
CL, questions:
1. you do anything before dumping the brass into the ceramic media?

2. You get any bridging in the flash hole?

3. You try any bottleneck cases? Bridging?

4. Where'd you get that media?

And thanks. My next purchase was gonna be a stainless steel liquid tumbler but I like what I see with the ceramic media.

Top
#3218798 - 04/10/13 06:32 PM Re: cleaning brass with ceramic media [Re: DaveB]
KPH
10 Point


Registered: 08/06/05
Posts: 3720
Loc: Hendersonville Tenn

Offline
What little black powder I have done I clean the cases in white vinger after shooting. I am mixing my ceramic with corn cob seams to to a good job and cuts down on the noisy. I just ordered a stainless now need to dirty up some brass for it.
_________________________
when I die please don't let the wife sale my guns for what I told her I paid for them

Top
#3219052 - 04/10/13 11:29 PM Re: cleaning brass with ceramic media [Re: DaveB]
Chaneylake
Brownsville Mafia
16 Point


Registered: 12/18/07
Posts: 16576
Loc: on the wings of a snow white d...

Offline
 Originally Posted By: DaveB
CL, questions:
1. you do anything before dumping the brass into the ceramic media?

2. You get any bridging in the flash hole?

3. You try any bottleneck cases? Bridging?

4. Where'd you get that media?

And thanks. My next purchase was gonna be a stainless steel liquid tumbler but I like what I see with the ceramic media.


no problem at all with flash hole

bottle neck cases take some extra care, you might have to go to smaller ceramic media

I soak fired brass in hot tap water and a squirt of dawn before placing in media, it might sit there for a week before its cleaned

I purchased media from Shiloh Sharps, it come with a cleaning liquid that you add to water in tumbler/vibrator. currently I am using a RCBS vibrating tumbler

my process is as follows: 100 pcs brass and media in tumbler, fill with tap water to level of media, add cleaning agent provided with media[some type of non foaming cleaner" a small shot of "Dawn" and a good squirt of "lime concentrate"

when I added the acidic lime it was the first time that brass was shiny on the inside, lemon concentrate did not perform for me as well as the lime did

some of the black powder shooters are liking the "stainless steel" media just as well as the ceramic
_________________________
"Don't piss down my back and tell me its rain", Fletcher, Outlaw Josey Wales

Living somewhere between this world and the other, Legends of the Fall

Top
#3219055 - 04/10/13 11:34 PM Re: cleaning brass with ceramic media [Re: DaveB]
Chaneylake
Brownsville Mafia
16 Point


Registered: 12/18/07
Posts: 16576
Loc: on the wings of a snow white d...

Offline
 Originally Posted By: DaveB
CL, questions:
1. you do anything before dumping the brass into the ceramic media?

2. You get any bridging in the flash hole?

3. You try any bottleneck cases? Bridging?

4. Where'd you get that media?

And thanks. My next purchase was gonna be a stainless steel liquid tumbler but I like what I see with the ceramic media.


just do as I did and put all the stuff into a RCBS vibrating tumbler and see what happens, I have been doing so for about 2 years and the tumbler is still running well
_________________________
"Don't piss down my back and tell me its rain", Fletcher, Outlaw Josey Wales

Living somewhere between this world and the other, Legends of the Fall

Top
#3220614 - 04/12/13 05:50 PM Re: cleaning brass with ceramic media [Re: Chaneylake]
DaveB
10 Point


Registered: 09/03/08
Posts: 4023
Loc: Shelby County

Offline
Thanks CL. We load a LOT of different calibers and I am tired unto death of poking media out of flash holes. Plus, I find the walnut in particular accumulates inside the sizing die and it'll wipe cases pretty quick if you are not watching. I know for sure.
Top
#3220877 - 04/13/13 12:23 AM Re: cleaning brass with ceramic media [Re: DaveB]
Chaneylake
Brownsville Mafia
16 Point


Registered: 12/18/07
Posts: 16576
Loc: on the wings of a snow white d...

Offline
 Originally Posted By: DaveB
Thanks CL. We load a LOT of different calibers and I am tired unto death of poking media out of flash holes. Plus, I find the walnut in particular accumulates inside the sizing die and it'll wipe cases pretty quick if you are not watching. I know for sure.



just be careful with tight necked bottle neck cases, the larger ceramic that I use will jam up inside and be a nightmare to remove from inside the case
_________________________
"Don't piss down my back and tell me its rain", Fletcher, Outlaw Josey Wales

Living somewhere between this world and the other, Legends of the Fall

Top
Page 1 of 1 1


Moderator:  RUGER, gtk, Bobby G, Unicam, CBU93, stretch, TurkeyBurd, Kimber45, Mrs.Unicam, Crappie Luck 
Hop to:
Top Posters
4105503
RUGER
86972
Deer Assassin
65392
BSK
60998
Crappie Luck
51376
spitndrum
Newest Members
UTRok16, ljhhunt3, perchjerkin, camohunter3, mtd
13273 Registered Users
Who's Online
98 registered (doubledownranch, Zulu, fourwheeler431, mossyhorns300, griz01, feather&fly, 9 invisible) and 137 anonymous users online.
Forum Stats
13273 Members
42 Forums
93089 Topics
1087893 Posts

Max Online: 788 @ 11/11/13 08:06 PM
Moon Phase
CURRENT MOON
September
Su M Tu W Th F Sa
1 2 3 4 5 6
7 8 9 10 11 12 13
14 15 16 17 18 19 20
21 22 23 24 25 26 27
28 29 30
Forum Donations
The TnDeer.Com Deer Talk Forum is for Tennessee Deer Hunters by Tennessee Deer Hunters. If you enjoy using our Talk Forum and would like to contribute to help in it's up-keep. Just submit your contribution by clicking on the DONATE button below and paying with PayPal or a major credit card. Any amount is much appreciated. Thanks for your support!

TN Burn Safe

Generated in 0.111 seconds in which 0.001 seconds were spent on a total of 14 queries. Zlib compression enabled.