Tndeer Logo

Page 1 of 1 1
Topic Options
#3194378 - 03/16/13 12:32 PM Ok Mr. Big and others I need some iron sight help
Bar7mag
4 Point


Registered: 07/01/07
Posts: 499
Loc: On the river

Offline
I have been really interested in killing some deer this year with iron sights. I shot today and at 50 yards I really shot horrible couldn't hit a paper plate size target. I do wear glasses and don't have the best eyesight. However at the 25 yard mark I could shoot 5 bullets all really close to each other. Went back to 50 yards and same story. This was with two different rifles so I know it has to be me. I could also shoot clay targets consistently at 50 yards but it just seemed so much easier aiming at the clay than the little bulls eye. Do you think I should have started out maybe at 50 yards shooting something like a pie plate instead of a bulls eye? I would love to do some reading on iron sight shooting. I have read a little and it said to really focus on making your front sight and the target clear and let your back sight be fuzzy is that correct form? Do you cover your bulls eye with your front sight or is a 6 o clock hold right underneath the bullseye preferred. Should I maybe order a peep sight? Any help or info greatly appreciated.
_________________________
Visit our website and talk forum at http://www.godgunsandammo.com or http://www.godgunsandammo.com/talkforums/viewforum.php?f=2

Top
#3194585 - 03/16/13 06:06 PM Re: Ok Mr. Big and others I need some iron sight help [Re: Bar7mag]
Wobblyshot1
8 Point


Registered: 10/13/10
Posts: 1215
Loc: Rutherford County

Offline
Assuming your iron sights are zeroed...

Find intended target. Take a breath, let out a little and hold. Align sights and and maintain upon target. Your focus is always on the front sight.

Begin squeezing trigger. Don't pull, snatch, or jerk. Maintain sight alignment on target.

Steady squeezing of the trigger will result in a controlled sear engagement release. BOOM....the bullets is on its way. Maintain sight alignment on target. At this point it's called follow through.

Surprise....you just hit the target where you were holding the sights.

Pretty basic but it works. Older eyes might be helped by using a peep rear sight.

One last thing......practice.
_________________________
Confederate American
Native Tennessean
N.R.A. Life Member
N.M.L.R.A. Member
I like Flintlocks!

Top
#3194587 - 03/16/13 06:09 PM Re: Ok Mr. Big and others I need some iron sight help [Re: Bar7mag]
mr.big
Non-Typical


Registered: 01/03/01
Posts: 28831
Loc: Copper Head Road

Offline
if you are using a post front and notch rear,I have better luck with a six hold and adjust the sights to hit center,,I focus only on the front sight and leave the bull fuzzy and try and leave just a little white showing between the top of post and bottom of bull..

for deer hunting fairly close a big ghost ring and a bead front might work better,,
_________________________
gun junky

Top
#3194949 - 03/17/13 07:09 AM Re: Ok Mr. Big and others I need some iron sight help [Re: mr.big]
Bar7mag
4 Point


Registered: 07/01/07
Posts: 499
Loc: On the river

Offline
Thanks guys gonna break out the pellet rifle and practice some. My dad always taught me to take the very top of the front post and put it in the bottom of the v in the back. It looks like people online recommend taking the entire front post and filling the v so it lines up straight across which do you recommend?
_________________________
Visit our website and talk forum at http://www.godgunsandammo.com or http://www.godgunsandammo.com/talkforums/viewforum.php?f=2

Top
#3194971 - 03/17/13 07:24 AM Re: Ok Mr. Big and others I need some iron sight help [Re: Bar7mag]
FULLDRAWXX75
12 Point


Registered: 01/29/07
Posts: 6259
Loc: Adirondack Mtns, NY

Offline
I was always taught the "pumkin on the post" method as Mr. Big has discribed. I have a difficult time with a V notch rear sight, but when I went to a rear peep, things came together nicely.
I have an old Savage 99 that was given to me by my late uncle that was set up with a tang peep, that is all he ever hunted with for yrs. I did not want to change anything on the gun, so I put in my time at the bench and after a few sessions, I was putting bullet holes into a 2" circle at 100 yds. Time, patients and practice.......................
A peep may help greatly.

FDXX75
_________________________
“Two things are infinite: the universe and human stupidity; and I'm not sure about the universe.”
― Albert Einstein


Top
#3195152 - 03/17/13 12:13 PM Re: Ok Mr. Big and others I need some iron sight help [Re: FULLDRAWXX75]
Bar7mag
4 Point


Registered: 07/01/07
Posts: 499
Loc: On the river

Offline
Thanks full draw for the advice. I guess more range time first then if things don't improve I will try a peep. Both of these guns I was shooting have really short barrels. One was a ruger 44 mag carbine and the other was a Winchester ranger 30-30. I also had my old single barrel Winchester 22 model 60 a and I could hit a lot better at 50 yards with it but I have shot it all my life.
_________________________
Visit our website and talk forum at http://www.godgunsandammo.com or http://www.godgunsandammo.com/talkforums/viewforum.php?f=2

Top
#3195153 - 03/17/13 12:13 PM Re: Ok Mr. Big and others I need some iron sight help [Re: FULLDRAWXX75]
Plateau Hunter
8 Point


Registered: 05/19/00
Posts: 1953
Loc: Cannon County, TN

Offline
I would look into a peep sight aka a receiver sight as made by Williams, Lyman, and at least formerly Redfield. You will be able to shoot much better than with conventional iron sights.
_________________________
We were soldiers once, and young.

Top
#3201487 - 03/23/13 12:01 PM Re: Ok Mr. Big and others I need some iron sight help [Re: Plateau Hunter]
southernhunter
8 Point


Registered: 09/08/10
Posts: 1938
Loc: alabama

Offline
Those guns are junk, u should give them to me to dispose of them ..
Top
#3201549 - 03/23/13 01:13 PM Re: Ok Mr. Big and others I need some iron sight help [Re: southernhunter]
1 good shot
8 Point


Registered: 09/05/09
Posts: 2493
Loc: memphis

content Online
don't aim too long
the longer you try to to hold it on target before shooting the more likely you are to start drifting
take time to get used to the gun and shoot for fun before you try to be an alvin york
once you learn the "feel of the gun" your accuracy will improve
it will be like tying your shoes- the muscle memory will do everything for you and you can focus on the other factors involved. this is especially true when hunting
when you have to focus on clear shot, being quiet, getting into shooting position without spooking the game and everything else
practice on small targets
when my dad was teaching me to shoot he would set up old shotgun hulls up for me to shoot at and told me when i could hit 5 with 5 shots i would be ready to go hunting with him

Top
Page 1 of 1 1


Moderator:  RUGER, gtk, Bobby G, Unicam, CBU93, stretch, TurkeyBurd, Kimber45, Mrs.Unicam, Crappie Luck 
Hop to:
Top Posters
4105861
RUGER
87563
Deer Assassin
65608
BSK
61366
Crappie Luck
51376
spitndrum
Newest Members
buckslayer85, crose84, Fisher 1959, AKeys, GUIDO
13383 Registered Users
Who's Online
182 registered (usanglure, FLIPPER, KyRick, Tony USMC, thebutcher, Gobblrgttr, 16 invisible) and 283 anonymous users online.
Forum Stats
13383 Members
42 Forums
95677 Topics
1119953 Posts

Max Online: 788 @ 11/11/13 08:06 PM
Moon Phase
CURRENT MOON
October
Su M Tu W Th F Sa
1 2 3 4
5 6 7 8 9 10 11
12 13 14 15 16 17 18
19 20 21 22 23 24 25
26 27 28 29 30 31
Forum Donations
The TnDeer.Com Deer Talk Forum is for Tennessee Deer Hunters by Tennessee Deer Hunters. If you enjoy using our Talk Forum and would like to contribute to help in it's up-keep. Just submit your contribution by clicking on the DONATE button below and paying with PayPal or a major credit card. Any amount is much appreciated. Thanks for your support!

TN Burn Safe

Generated in 0.046 seconds in which 0.001 seconds were spent on a total of 14 queries. Zlib compression enabled.