Tndeer Logo

Page 1 of 3 123>
Topic Options
#3193047 - 03/14/13 09:32 PM Burris Fastfire 3 - Bad First Impression
Andy S.
TnDeer Old Timer
14 Point


Registered: 07/26/99
Posts: 7850
Loc: Atoka, TN

Offline
Add me to the group of unlucky ones. I mounted my brand new FF3 on a speedbead mount (12 gauge Rem 870 synthetic) last week and shot it for the first time this evening. To start, I left my Magnum Gobble Dot sights on my vent rib to use as a point of reference for the red dot (getting the windage and elevation real close before my first shot). I adjusted the red dot to where it aligned perfect with my gobble dot sights, which are nothing more than rifle sights with TruGlo fiber optics that are easy to see. I started out shooting high brass squirrel loads at 30 yards to check POA/POI, and my target was 36"X36". I would shoot my gun, lay it down on the ground, walk to my target, put another target up and then walk back to my gun, sit down, shoulder it, look through red dot sight, etc. Three out of the six shots, my red dot moved enough that I could tell with my own eyes when I shouldered the next time, and it moved substantially the last two times of the six, like ten clicks on the elevation. My very last shot was a hard kicking 3.5" MagBlend and it really caused the red dot to shift an unbelievable amount. I shot the MagBlend, laid my gun down, walked down to the target, put a new target up and came back and shouldered my gun and the red dot was literally pointing at my rear sight base, way way low compared to where it was just two minutes ago when I shot the MagBlend. That was enough for me. Furthermore, I had to move the elevation and windage adjustments on my last three shots just to get it back close to my Gobble Dot Sights, which are stationary and not moving, that's for certain. I packed all of my stuff up and came to the house. I can honestly say there is nothing worse than not having confidence in your gear. I am shipping back to Amazon tomorrow for a refund. This is not a slam on Burris by any means, just thought that it was worth sharing with the group.

Here's what it looked like mounted on my gun.





My plan of action at this point is to use my tried and true sights that are on the gun and in the meantime I am going to see if a Doctor red dot will mount to my speedbead mount. I have read good things about them, albeit they are more costly, that's for sure. I really like the concept of the red dot and how it looked when I aimed, but I despise a floating red dot or anything else for that matter that is a confidence killer on something as important as my turkey gun. YMMV
_________________________
Andy S.

If I had saved all the money I spent on hunting, I'd spend it on hunting.

Top
#3193090 - 03/14/13 10:40 PM Re: Burris Fastfire 3 - Bad First Impression [Re: Andy S.]
fredfred
8 Point


Registered: 06/24/12
Posts: 1727
Loc: crossville, tn

Offline
WOW that sucks. I would give Burris a call before I gave up on it. I've heard nothing but great stuff about there customer service.
_________________________
AKA: Luke Sky Dumper

Democrats and liberals have turned our country into a bunch of SISSYS

Top
#3193147 - 03/15/13 05:58 AM Re: Burris Fastfire 3 - Bad First Impression [Re: fredfred]
tasaman
8 Point


Registered: 01/11/10
Posts: 1049
Loc: Woodlawn, TN

content Online
That's some big bucks to shell out for something that has that many problems. I don't recall the FFII having many negative comments. Good luck with it.
Top
#3193156 - 03/15/13 06:17 AM Re: Burris Fastfire 3 - Bad First Impression [Re: tasaman]
Big Gun
16 Point


Registered: 09/02/00
Posts: 10659
Loc: Bartlett

Offline
That sucks. I just put a Truglo red dot on my 870 and it was so close that I only had to adjust it 2 clicks up to be on at 30 yards. My eyes have gotten to the point that even with fiber optic sights I couldn't see them good, this red dot is really nice, so far. After shooting several 3" loads at 45 yards, I'm happy with the Mag Blends.
Top
#3193165 - 03/15/13 06:27 AM Re: Burris Fastfire 3 - Bad First Impression [Re: tasaman]
Andy S.
TnDeer Old Timer
14 Point


Registered: 07/26/99
Posts: 7850
Loc: Atoka, TN

Offline
 Originally Posted By: tasaman
I don't recall the FFII having many negative comments.
Look here to read about others stating similar "drifting" experiences over the last few years. http://www.gobblernation.com/phpBB3/viewtopic.php?f=2&t=4743

I found the link above discussing possible issues AFTER I ordered my FF3 and was skeptical the whole time it was en route to my house. Considering it was a Burris product that many raved about, I thought I should at least give it a chance so I did, but to no avail. With that said, the majority of reviews I have read online on various hunting forums has all been positive when it comes to Burris Red Dots. I think the drifting problem is the exception to the rule and not the norm. Just the thought of it being off one morning when I have a gobbler in killing range is enough to kill every ounce of my confidence in it. As the old saying goes, you never get a second chance to make a first impression.
_________________________
Andy S.

If I had saved all the money I spent on hunting, I'd spend it on hunting.

Top
#3193214 - 03/15/13 08:01 AM Re: Burris Fastfire 3 - Bad First Impression [Re: Andy S.]
drrxnupe
6 Point


Registered: 02/15/09
Posts: 940
Loc: Nashville, TN & Oxford, MS

Offline
Sorry Andy. My experience was completely opposite of yours. For me, the FFIII is the best thing since sliced bread. Granted, I mount mine on top instead of using the speedbead. I did notice that my bead sight was quite a distance away from the red dot. I decided to aim my first shots using the red dot anyway and they were dead on. The dot did move a little in between shots but I realized that the mount screw had loosened. A squirt of loctite fixed that.
Top
#3193219 - 03/15/13 08:10 AM Re: Burris Fastfire 3 - Bad First Impression [Re: drrxnupe]
muddyboots
12 Point


Registered: 11/06/02
Posts: 6960
Loc: savannah, tn., usa

Offline
Thats a bummer
_________________________
X Force is Bad!
Let em go and let em grow!
There is a difference in a turkey killer and a turkey hunter!

Top
#3193234 - 03/15/13 08:24 AM Re: Burris Fastfire 3 - Bad First Impression [Re: Andy S.]
Grizzly Johnson Moderator
Team Grizzly
16 Point


Registered: 10/07/08
Posts: 15085
Loc: Tennessee

Offline
For those that didn't read throught the reference thread posted:

By the Burris Optics guy:

The FF2 is tricky to sight in. We are aware of that which is the reason we made changes on the FF3 to eliminate that problem. The dot can shift when locking it down. If you keep it in the rest, move the dot to your pattern, and then watch the dot as you tighten the lock screws you should be able to get it sighted in without too many headaches. Not the best way but it seems to work pretty good. YMMV.

The FF3 uses a clicker adjustment and no locks so there shouldn't be too many issues with sighting that one in.

The drifting issue that everyone is referring to is a complete mystery to me. We've been making that sight for 4 years and this is the first I've heard of it. If you have a sight that you know is drifting please let me know. I'll swap you out with a FF3 just so I can test it myself. Hell I'll even buy it back if you absolutely don't want a Burris product. Let me know if we have any takers.



Like you, I'm more concerned with the drifting issue that you guys are seeing, much more concerned. I use the same sight on an 835 and haven't had any issues but I'm not shooting loads that pattern like the stuff you guys are using, unfortunately. I really would like to get one of your worst sights in hand. I'll put it through my own tests and get it on video for you. Make sure you note the serial number. I just got off the phone with our QC manager and he assured me that we have all of the necessary fixtures to test the sight and the they just installed a new collimator last week that will show us a precise POI/POA shift. One way or another I will find an answer to the problem.

All I ask is that you guys give us a chance to look into this from our side before flaming us too hard. If there's an issue we WANT to know about it so we can fix it. If there's someone that just hates Burris, or me for that matter, then knock yourself out but for the rest of you I will absolutely try to get you an answer and as much documentation to back up our findings as possible. Right now it sounds like we are going to video tape it so you can see for yourself. You may want us to try something else along the way that we didn't think of so if nothing else it should be entertaining.
_________________________
Criminals thrive on the indulgence of society's understanding.

Your compassion is a weakness your enemies will not share.

Top
#3193235 - 03/15/13 08:30 AM Re: Burris Fastfire 3 - Bad First Impression [Re: muddyboots]
Bigg E
4 Point


Registered: 10/21/10
Posts: 472
Loc: T-County

Offline
That is a bad deal. I have seen lots of good reviews about them but I went with the Tru Brite open just because it was much cheaper. I do like how low the FF mounts on the speedbead mount though. On a side note, I think I recognize that shop.

Edited by Bigg E (03/15/13 08:45 AM)

Top
#3193241 - 03/15/13 08:36 AM Re: Burris Fastfire 3 - Bad First Impression [Re: Grizzly Johnson]
Andy S.
TnDeer Old Timer
14 Point


Registered: 07/26/99
Posts: 7850
Loc: Atoka, TN

Offline
 Originally Posted By: Grizzly Johnson
If you have a sight that you know is drifting please let me know. I'll swap you out with a FF3 just so I can test it myself. Hell I'll even buy it back if you absolutely don't want a Burris product. Let me know if we have any takers.
I read this and I'll agree that is top notch customer service and a great gesture on his part, but I desire much more than first class customer service when I am afield turkey hunting. I provided him a picture of my box with serial number so he could track it down and test it if he so desired. With turkey hunting, I will always demand a reliable product that will stand the test of time. Now the next 1,000 FF3s may just do that, but who has countless hours and an endless supply of costly high dollar shells to sort out which ones are dependable and which ones are not? I know I do not. Needless to say, my first experience with a Burris product was not the most favorable by a LONG shot. Would I try another Burris product, most likely yes, but it would be on their dime and not mine.
_________________________
Andy S.

If I had saved all the money I spent on hunting, I'd spend it on hunting.

Top
Page 1 of 3 123>


Moderator:  RUGER, Bobby G, Unicam, Cuttin Caller, CBU93, stretch, TurkeyBurd, Kimber45, Mrs.Unicam, Crappie Luck, Grizzly Johnson 
Hop to:
Top Posters
4104908
RUGER
86356
Deer Assassin
64846
BSK
60530
Crappie Luck
51375
spitndrum
Newest Members
purrpplee, tnduckhunter, draw2drop, Oh Deer, Deer slayer85
13112 Registered Users
Who's Online
8 registered (paincave_2000, tasaman, Huntinnut, bowriter, Dale3, THE DUKE) and 68 anonymous users online.
Forum Stats
13112 Members
42 Forums
89295 Topics
1044337 Posts

Max Online: 788 @ 11/11/13 08:06 PM
Moon Phase
CURRENT MOON
July
Su M Tu W Th F Sa
1 2 3 4 5
6 7 8 9 10 11 12
13 14 15 16 17 18 19
20 21 22 23 24 25 26
27 28 29 30 31
Forum Donations
The TnDeer.Com Deer Talk Forum is for Tennessee Deer Hunters by Tennessee Deer Hunters. If you enjoy using our Talk Forum and would like to contribute to help in it's up-keep. Just submit your contribution by clicking on the DONATE button below and paying with PayPal or a major credit card. Any amount is much appreciated. Thanks for your support!

TN Burn Safe

Generated in 0.231 seconds in which 0.001 seconds were spent on a total of 15 queries. Zlib compression enabled.