Tndeer Logo

Page 1 of 2 12>
Topic Options
#3191428 - 03/13/13 08:37 AM Picatinny rail question
REN
Good ol' Boys "Team Grizzly"
12 Point


Registered: 10/24/07
Posts: 5207
Loc: Wilson County, TN

Offline
i put this in the gunsmith forum as well but thought id ask here too

I have a stoeger m2000 i use for turkey hunting and it is drilled and tapped for the Weaver 93a mount. However i have a FF3 i have mounted on it now and seems the only 2 slots are all the way up or all the way back. does anyone know where i can get a picatinny rail with the same specs as the weaver 93a???
_________________________
RollTide

John 3:16



Top
#3191498 - 03/13/13 09:34 AM Re: Picatinny rail question [Re: REN]
Grizzly Johnson Moderator
Team Grizzly
16 Point


Registered: 10/07/08
Posts: 15018
Loc: Tennessee

Offline
Check into this man.... I have been trying to cross reference....


http://www.opticsplanet.com/evolution-gu...cope-mount.html

This link for cross reference info:

http://www.midwayusa.com/Product/116827/weaver-top-mount-scope-base-93-gloss

So if you can find another brand, maybe cheaper that fits those models.... be nice to find them on the shelf, in a store, to verify the fit.

http://www.weaveroptics.com/rings_bases/bases/
_________________________
Criminals thrive on the indulgence of society's understanding.

Your compassion is a weakness your enemies will not share.

Top
#3191505 - 03/13/13 09:39 AM Re: Picatinny rail question [Re: Grizzly Johnson]
REN
Good ol' Boys "Team Grizzly"
12 Point


Registered: 10/24/07
Posts: 5207
Loc: Wilson County, TN

Offline
this one may work, its not a picatinny but much cheaper....i do know the base on it now the 93A not the normal 93. If i remember correctly the only difference is the screws on the 93a are longer.

http://www.mountsplus.com/AR-15_Accessories/AR-15_Scope_Rings/105-WVR-48506.html
_________________________
RollTide

John 3:16



Top
#3191507 - 03/13/13 09:43 AM Re: Picatinny rail question [Re: REN]
Grizzly Johnson Moderator
Team Grizzly
16 Point


Registered: 10/07/08
Posts: 15018
Loc: Tennessee

Offline
If you know the screw size, you can probably get the right length screws from MidwayUSA.

Going by the 93 fits referenced in the links posted above, a p. rail that fits those Remington or the Ben. M1 should fit your shotgun.
_________________________
Criminals thrive on the indulgence of society's understanding.

Your compassion is a weakness your enemies will not share.

Top
#3191520 - 03/13/13 09:55 AM Re: Picatinny rail question [Re: Grizzly Johnson]
REN
Good ol' Boys "Team Grizzly"
12 Point


Registered: 10/24/07
Posts: 5207
Loc: Wilson County, TN

Offline
i dont know the size, I just remember getting the 93 and the screws wouldnt go all the way in so i have to find the 93a mount screws.

I assume they are the same base just longer screws. I have the screws off the one now so in theory those should work on a new base?
_________________________
RollTide

John 3:16



Top
#3191524 - 03/13/13 09:59 AM Re: Picatinny rail question [Re: REN]
RJT
4 Point


Registered: 02/08/08
Posts: 135
Loc: Wheel, TN

Offline
Take a look at weaver #48339. I just put this on a stoeger M3500. The screws that came with it were too small but i had some that fit from another weaver mount.
Top
#3191532 - 03/13/13 10:09 AM Re: Picatinny rail question [Re: RJT]
REN
Good ol' Boys "Team Grizzly"
12 Point


Registered: 10/24/07
Posts: 5207
Loc: Wilson County, TN

Offline
thats what im looking for. what screws fit if the ones that came with it didnt?
_________________________
RollTide

John 3:16



Top
#3191552 - 03/13/13 10:21 AM Re: Picatinny rail question [Re: REN]
RJT
4 Point


Registered: 02/08/08
Posts: 135
Loc: Wheel, TN

Offline
The rail says for bennelli and when I received it , it was marked for Super Black Eagle. I suspect they make one for benelli/berretta that the screws will fit. I found extra screws in my safe that were from a weaver mount that I have had for years. I don't know the size but they were not as "fat" as the screws that came with the 48339. The ones I put in were a little longer also but i fitted them and found that I needed to grind the front two. After a light grind and a drop of threadlocker they are solid. I was thinking about returning the 48339 and getting the correct one for the older bennelli/berretta but the impatient part of me found a way to make it work. I will try and look up the correct part# but if you have screws that fit the rail you currently have then they should adapt to this rail.

Edited by RJT (03/13/13 10:22 AM)

Top
#3191556 - 03/13/13 10:26 AM Re: Picatinny rail question [Re: RJT]
REN
Good ol' Boys "Team Grizzly"
12 Point


Registered: 10/24/07
Posts: 5207
Loc: Wilson County, TN

Offline
I guess they should IF the that rail has the same thickness as the current weaver 93a style. I guess no way to know unless i try it.
_________________________
RollTide

John 3:16



Top
#3191562 - 03/13/13 10:33 AM Re: Picatinny rail question [Re: REN]
RJT
4 Point


Registered: 02/08/08
Posts: 135
Loc: Wheel, TN

Offline
The rail appears to be about the same thickness and i only had to grind a fraction off. The longer front screws were putting a little pressure on the barrel action. I put them in and did a complete break down of the gun and noticed that took quite a bit of extra force to get the barrel slid out of the receiver. I then ground the screws slightly and it freed everything up. I am setting this one up for turkey and am adding a mueller quickshot sight. I think the extra spacing on the picatinny rail will allow me to fine tune the position of the sight.
Top
Page 1 of 2 12>


Moderator:  RUGER, Bobby G, Unicam, Cuttin Caller, CBU93, stretch, TurkeyBurd, Kimber45, Mrs.Unicam, Crappie Luck, Grizzly Johnson 
Hop to:
Top Posters
4104855
RUGER
86124
Deer Assassin
64720
BSK
60329
Crappie Luck
51368
spitndrum
Newest Members
MisquitoNet, strutter rutter, SAUM, Hunter11, nikko610
13076 Registered Users
Who's Online
16 registered (paincave_2000, 7mag Man, mossyoakmantn, Jhawk, Yotehntr, bowhunterfanatic, 2 invisible) and 56 anonymous users online.
Forum Stats
13076 Members
42 Forums
87995 Topics
1031435 Posts

Max Online: 788 @ 11/11/13 08:06 PM
Moon Phase
CURRENT MOON
July
Su M Tu W Th F Sa
1 2 3 4 5
6 7 8 9 10 11 12
13 14 15 16 17 18 19
20 21 22 23 24 25 26
27 28 29 30 31
Forum Donations
The TnDeer.Com Deer Talk Forum is for Tennessee Deer Hunters by Tennessee Deer Hunters. If you enjoy using our Talk Forum and would like to contribute to help in it's up-keep. Just submit your contribution by clicking on the DONATE button below and paying with PayPal or a major credit card. Any amount is much appreciated. Thanks for your support!

TN Burn Safe

Generated in 0.284 seconds in which 0.009 seconds were spent on a total of 15 queries. Zlib compression enabled.