Tndeer Logo

Page 1 of 3 123>
Topic Options
#3162174 - 02/13/13 08:58 AM do u mount your own scopes
pseshooter300
8 Point


Registered: 04/03/11
Posts: 1019
Loc: kingsport

Offline
Do you mount your own scopes? Do your torque and level? Like some advice would like to get the equipment to do this myself
Top
#3162189 - 02/13/13 09:07 AM Re: do u mount your own scopes [Re: pseshooter300]
HuntingDicksonDTC
8 Point


Registered: 11/09/06
Posts: 2377
Loc: Dickson

Offline
do all my own - torque wrench, loctite, made a set of alignment bars out of some alum round stock, small level, and lapping tool



Edited by HuntingDicksonDTC (02/13/13 09:07 AM)
Edit Reason: add loctite
_________________________
Treat a man as he is & he will remain as he is.

Treat a man as he could be & he will become what he should be.

Top
#3162198 - 02/13/13 09:11 AM Re: do u mount your own scopes [Re: HuntingDicksonDTC]
Deer Assassin
dammit
Non-Typical


Registered: 08/01/03
Posts: 86319
Loc: Kingston Springs

Offline
yes

i level it

never use loctite i see no need for it even when i shot a 300 rum
_________________________
Drag Racing

Spending money I dont have

on things I dont need

to impress people I dont know

Top
#3162207 - 02/13/13 09:21 AM Re: do u mount your own scopes [Re: Deer Assassin]
Nhill
8 Point


Registered: 09/30/01
Posts: 1629
Loc: Maryville, TN

Offline
Yes, and I don't use or need any special tools.
Top
#3162210 - 02/13/13 09:23 AM Re: do u mount your own scopes [Re: Nhill]
HuntingDicksonDTC
8 Point


Registered: 11/09/06
Posts: 2377
Loc: Dickson

Offline
i only loctite the bases to receiver, not rings
_________________________
Treat a man as he is & he will remain as he is.

Treat a man as he could be & he will become what he should be.

Top
#3162214 - 02/13/13 09:24 AM Re: do u mount your own scopes [Re: Deer Assassin]
ratsnakeboogy
10 Point


Registered: 08/28/08
Posts: 3448
Loc: Andersonville, TN

Offline
I do all mine, I use a Wheeler Engineering scope mounting st up. It has torque wrench, lapping bars, levels, etc.

I use "hard as nails" clear fingernail polish on the base screws, nothing on the ring screws. Make sure you degrease the holes and screws before you torque everything down, if you leave oil on them, they will shoot loose.

Top
#3162256 - 02/13/13 09:49 AM Re: do u mount your own scopes [Re: ratsnakeboogy]
WestTn Huntin'man
16 Point


Registered: 11/19/06
Posts: 11944
Loc: Benton Co.

Offline
It is not very difficult or expensive to do it yourself. The new laser bore siters are very reasonably priced.
I will past on 1 tip for everyone. There are many types of Loctite.The Blue 242 would be the preferred type to use before assemblely You will be able to remove the scope if needed at some time in the Future.
http://www.loctiteproducts.com/p/10/15/t_lkr_blue/overview/Loctite-Threadlocker-Blue-242.htm

The green 290 is good if something is already put together and tight. It will wick down into the threads after a screw is tight.
The Red 271 is the hardest to break loose. It is for extreme vibration and shock.I wouldn't recomend using it unless you know you'll never want a screw out (scope bases) or unless you have a very big gun, full auto, ect. where screws coming loose is a problem.

I had to go to Loctite school a few years back for my job. Check out their site lots of good info.
_________________________
Proverbs 3:27 Whenever you possibly can, do good to those who need it

Top
#3162288 - 02/13/13 10:26 AM Re: do u mount your own scopes [Re: WestTn Huntin'man]
pseshooter300
8 Point


Registered: 04/03/11
Posts: 1019
Loc: kingsport

Offline
Thanks im thinking about picking up a wheeler torque wrench and level just do my own maybe some type of vise
Top
#3162292 - 02/13/13 10:29 AM Re: do u mount your own scopes [Re: pseshooter300]
pressfit
10 Point


Registered: 12/28/09
Posts: 3034
Loc: Giles Co. Tn

Offline
All you need is a vise, allen wrenches and a plumb bob..
_________________________
Do you know Jesus as your Savior?don't wait until its too late.You are only one heartbeat away from eternity. You never know when it will be your last. Repent and trust the Lord today as your Savior!

Top
#3162662 - 02/13/13 03:15 PM Re: do u mount your own scopes [Re: pressfit]
7mm08
10 Point


Registered: 09/12/07
Posts: 4921
Loc: In a river hopefully!

Offline
 Originally Posted By: pressfit
All you need is a vise, allen wrenches and a plumb bob..


Now you have torqued my interest....how do you use a plumb bob? Center it and then mark it on the rings? Sorry, stupid about certain stuff...thanks
_________________________
I hunt and fish not for the thrill of the kill, but for the thrill of the grill!!

Top
Page 1 of 3 123>


Moderator:  RUGER, gtk, Bobby G, Unicam, CBU93, stretch, TurkeyBurd, Kimber45, Mrs.Unicam, Crappie Luck 
Hop to:
Top Posters
4104887
RUGER
86319
Deer Assassin
64820
BSK
60514
Crappie Luck
51375
spitndrum
Newest Members
tnduckhunter, draw2drop, Oh Deer, Deer slayer85, Deadeye14
13111 Registered Users
Who's Online
107 registered (7mmMag, Brisco Darlin, swami, catm1, WMAn, bowtch huntr209, 14 invisible) and 166 anonymous users online.
Forum Stats
13111 Members
42 Forums
89142 Topics
1042549 Posts

Max Online: 788 @ 11/11/13 08:06 PM
Moon Phase
CURRENT MOON
July
Su M Tu W Th F Sa
1 2 3 4 5
6 7 8 9 10 11 12
13 14 15 16 17 18 19
20 21 22 23 24 25 26
27 28 29 30 31
Forum Donations
The TnDeer.Com Deer Talk Forum is for Tennessee Deer Hunters by Tennessee Deer Hunters. If you enjoy using our Talk Forum and would like to contribute to help in it's up-keep. Just submit your contribution by clicking on the DONATE button below and paying with PayPal or a major credit card. Any amount is much appreciated. Thanks for your support!

TN Burn Safe

Generated in 0.232 seconds in which 0 seconds were spent on a total of 15 queries. Zlib compression enabled.