Tndeer Logo

Page 2 of 3 <123>
Topic Options
#3162815 - 02/13/13 05:42 PM Re: do u mount your own scopes [Re: ratsnakeboogy]
FULLDRAWXX75
12 Point


Registered: 01/29/07
Posts: 6222
Loc: Adirondack Mtns, NY

Offline
 Originally Posted By: ratsnakeboogy
I do all mine, I use a Wheeler Engineering scope mounting st up. It has torque wrench, lapping bars, levels, etc.

I use "hard as nails" clear fingernail polish on the base screws, nothing on the ring screws. Make sure you degrease the holes and screws before you torque everything down, if you leave oil on them, they will shoot loose.


Ditto on the Wheeler Mounting kit, I bought one a few yrs back, one of the best investments I ever paid for.

As far as loctite/oil/no oil.....................I use the purple loctite supplied with the kit on all base mount screws. I was watching the Leupold U tube video the other day and they recommend lightly oiling the threads on the ring cap screws to provide even torguing. I have never had a mount shoot loose on any gun I ever mounted a scope on and I have over 50 or more over the yrs.

FDXX75
_________________________
“Two things are infinite: the universe and human stupidity; and I'm not sure about the universe.”
― Albert Einstein


Top
#3163080 - 02/13/13 08:24 PM Re: do u mount your own scopes [Re: FULLDRAWXX75]
280longshot
8 Point


Registered: 09/20/10
Posts: 1355
Loc: Tn, Tipton

Offline
I always mount my own to get the desired eye relief and the correct feel for me effect. I also use the hard as nails clear finger nail polish on the mount screws. I have used the small levels but generally don't use them. NOT SURE why but when I use the levels the cross hairs just aren't level after I shoulder the rifle and look through the scope. I'm sure it's how I hold my rifle but it works for me.
I have shouldered some of my friends rifles and the eye relief has been off. When you mount your own I think you get that custom fit for you.
_________________________
Semper Fi
HMM-161
HMM-364

Top
#3163086 - 02/13/13 08:29 PM Re: do u mount your own scopes [Re: FULLDRAWXX75]
WestTn Huntin'man
16 Point


Registered: 11/19/06
Posts: 11967
Loc: Benton Co.

Offline
Not sure why the purple 222 is not on their site ??? The 222 is low Strength and one of the easiest to break loose if you plan on removing screws at some time.
_________________________
Proverbs 3:27 Whenever you possibly can, do good to those who need it

Top
#3163229 - 02/13/13 09:41 PM Re: do u mount your own scopes [Re: 7mm08]
pressfit
10 Point


Registered: 12/28/09
Posts: 3103
Loc: Giles Co. Tn

Offline
 Originally Posted By: 7mm08
 Originally Posted By: pressfit
All you need is a vise, allen wrenches and a plumb bob..


Now you have torqued my interest....how do you use a plumb bob? Center it and then mark it on the rings? Sorry, stupid about certain stuff...thanks
I actually left out one important tool needed.. a level..
clamp the rifle in a vise, level it left to right or side to side what ever you want to call it.. hang a plumb bob and put the scope in the rings but not tight enough that you cant rotate the scope.. look through the scope until the plumb bob string is in the cross hairs... then rotate the scope to line up with the string.. thats it.. perfect lined up scope with no cant... \:\)
_________________________
Do you know Jesus as your Savior?don't wait until its too late.You are only one heartbeat away from eternity. You never know when it will be your last. Repent and trust the Lord today as your Savior!

Top
#3163372 - 02/14/13 04:45 AM Re: do u mount your own scopes [Re: pressfit]
7mm08
10 Point


Registered: 09/12/07
Posts: 4954
Loc: In a river hopefully!

Offline
Ahhhhh got it. Thanks.
I was thinking you popped a line in the bottom rings somehow? HA.
_________________________
I hunt and fish not for the thrill of the kill, but for the thrill of the grill!!

Top
#3163547 - 02/14/13 07:47 AM Re: do u mount your own scopes [Re: 7mm08]
infoman jr.
10 Point


Registered: 10/05/03
Posts: 3768
Loc: Elizabethtown, KY

Offline
Yep, I use FAT wrench and a little 242 on the base screws.
_________________________
NRA Lifetime Member

Top
#3163997 - 02/14/13 02:23 PM Re: do u mount your own scopes [Re: infoman jr.]
BigD_625
10 Point


Registered: 09/30/09
Posts: 3365
Loc: Maury County, TN

Offline
I bought the leveling kit, but end up not using it most of the time. I usually eyeball mine by shouldering it several times to check that reticle is level, and the eye relief is correct. I make sure to tighten the screws evenly and have not had any problems with loose mounts or accuracy.

I've mounted scopes on everything I've had from 17 HMR to a .300 wby mag with no issues. I have resorted to shouldering my gun and moving it horizontally toward the door facing to see if the vertical crosshair hits top and bottom at the same time for a quick level check.
_________________________
-----------
It's better to be smarter than you look...than to look smarter than you are.

Top
#3164023 - 02/14/13 02:51 PM Re: do u mount your own scopes [Re: 7mm08]
Lawrence
8 Point


Registered: 10/03/07
Posts: 1906
Loc: MT. Juliet Tennessee

Offline
I do
_________________________
Gobble
Gobble

BOOM


Top
#3164518 - 02/14/13 11:08 PM Re: do u mount your own scopes [Re: Lawrence]
Vermin93
12 Point


Registered: 12/11/10
Posts: 5630
Loc: Dallas, TX & Signal Mtn, TN

Offline
I also have the Wheeler scope mounting kit and mount my own scopes. It's been well worth the money. I did find the cheap plastic 2-piece level system in the Wheeler kit to be just about worthless, though.
_________________________
“The more I read and the more I listen, the more apparent it is that our society suffers from an alarming degree of public ignorance” - Retired Supreme Court Justice Sandra Day O’Connor

Top
#3166744 - 02/16/13 08:44 PM Re: do u mount your own scopes [Re: pressfit]
Hunter 257W
10 Point


Registered: 10/04/12
Posts: 3068
Loc: Franklin County

Offline
 Originally Posted By: pressfit
All you need is a vise, allen wrenches and a plumb bob..


Yeah, I think a plumb bob is a lot better than trying to center a bubble in a level. Just get the rifle with a flat level surface under the forend and align the verticle croshair with the plumb bob string and you are about as good as you can get.

Top
Page 2 of 3 <123>


Moderator:  RUGER, gtk, Bobby G, Unicam, CBU93, stretch, TurkeyBurd, Kimber45, Mrs.Unicam, Crappie Luck 
Hop to:
Top Posters
4105216
RUGER
86659
Deer Assassin
65033
BSK
60878
Crappie Luck
51376
spitndrum
Newest Members
swampdonkey83, chrisp711, DEH20, tomtalker, jg12
13193 Registered Users
Who's Online
20 registered (tnbowhunter3, BamaProud, LawDawg55, MUP, TRIGGER, Phil1979, 4 invisible) and 53 anonymous users online.
Forum Stats
13193 Members
42 Forums
91312 Topics
1067420 Posts

Max Online: 788 @ 11/11/13 08:06 PM
Moon Phase
CURRENT MOON
August
Su M Tu W Th F Sa
1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
31
Forum Donations
The TnDeer.Com Deer Talk Forum is for Tennessee Deer Hunters by Tennessee Deer Hunters. If you enjoy using our Talk Forum and would like to contribute to help in it's up-keep. Just submit your contribution by clicking on the DONATE button below and paying with PayPal or a major credit card. Any amount is much appreciated. Thanks for your support!

TN Burn Safe

Generated in 0.044 seconds in which 0.001 seconds were spent on a total of 14 queries. Zlib compression enabled.